ENGINE
171
CHECKING AND SETTING THE VALVE TIMING
Engine : RFN
#
2003
Position of the crankshaft.
NOTE :
This operation enables you to position all the pegs in their respective pegging points.
Peg :
- The camshaft pulleys, using tool
[2]
.
- The crankshaft, using tool
[1]
.
If this should not be possible, reposition the flange
(17)
.
IMPERATIVE :
This operation guarantees the setting of the timing for subsequent operations.
Slacken the screw
(16)
so as to free the pinion
(17)
of the crankshaft.
Bring the flange
(17)
to the pegging point, using tool
[5].
Position the tool
[1]
.
Tighten the screw
(16)
to : (Tool
FACOM D360
).
Tighten to
:
4 ± 0,4 m.daN
Angular tighten
:
53° ± 5°
Remove tools
[1], [2]
and
[5]
.
ESSENTIAL : When tightening screw (16), hold the pulley (17) by means of tool [5].
B1EK1TBD
B1EK1TCD
XSARA - XSARA PICASSO
