manualshive.com logo in svg

Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch, Software Manual

The Cisco WS-X6148-FE-SFP= Classic Interface Module Switch is a versatile networking solution. Enhance your network performance with this reliable switch featuring 48 ports. For seamless setup and configuration, download the free software manual from manualshive.com. Maximize your networking potential effortlessly with this high-quality product.

Share
Download
background image

5-18

Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4

78-13315-02

Chapter 5      Configuring Ethernet VLAN Trunks

Example VLAN Trunk Configurations

Switch_1> (enable) 

show vtp domain

Domain Name                      Domain Index VTP Version Local Mode  Password

-------------------------------- ------------ ----------- ----------- ----------

BigCorp                          1            2           server      -

Vlan-count Max-vlan-storage Config Revision Notifications

---------- ---------------- --------------- -------------

11         1023             13              disabled

Last Updater    V2 Mode  Pruning  PruneEligible on Vlans

--------------- -------- -------- -------------------------

172.20.52.10    disabled enabled  2-1000

Switch_1> (enable) 

show vlan

VLAN Name                             Status    Mod/Ports, Vlans

---- -------------------------------- --------- ----------------------------

1    default                          active    1/1-2

                                                2/1-12

                                                5/1-2

10   VLAN0010                         active

20   VLAN0020                         active

30   VLAN0030                         active

40   VLAN0040                         active

50   VLAN0050                         active

60   VLAN0060                         active

1002 fddi-default                     active

1003 token-ring-default               active

1004 fddinet-default                  active

1005 trnet-default                    active

.

.

.

Switch_1> (enable)

Step 4

Configure the supervisor engine uplinks on Switch 1 as ISL trunk ports by entering the 

set trunk

 

command. Specifying the 

desirable

 mode on the Switch  1 ports causes the ports on Switch  2 to negotiate 

to become trunk links (assuming that the Switch 2 uplinks are in the default 

auto

 mode).

Switch_1> (enable) 

set trunk 1/1 desirable

Port(s) 1/1 trunk mode set to desirable.

Switch_1> (enable) 04/21/1998,03:05:05:DISL-5:Port 1/1 has become isl trunk

Switch_1> (enable) 

set trunk 1/2 desirable

Port(s) 1/2 trunk mode set to desirable.

Switch_1> (enable) 04/21/1998,03:05:13:DISL-5:Port 1/2 has become isl trunk

Step 5

Verify that the trunk links are up by entering the 

show trunk

 command.

Switch_1> (enable) 

show trunk 1

Port      Mode         Encapsulation  Status        Native vlan

--------  -----------  -------------  ------------  -----------

 1/1      desirable    isl            trunking      1

 1/2      desirable    isl            trunking      1

Port      Vlans allowed on trunk

--------  ---------------------------------------------------------------------

 1/1      1-1005, 1025-4094

 1/2      1-1005, 1025-4094

Port      Vlans allowed and active in management domain

--------  ---------------------------------------------------------------------

 1/1      1,10,20,30,40,50,60

 1/2      1,10,20,30,40,50,60

Summary of Contents for WS-X6148-FE-SFP= - Classic Interface Module Switch

















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WS-X6148-FE-SFP= - Classic Interface Module Switch

XDS 910 Reference Manual preview
910
Brand: XDS Pages: 99
Rain Bird E-3 Installation, Programming & Operation Manual preview
E-3
Brand: Rain Bird Pages: 17
Hama 53107 Operating Instruction preview
53107
Brand: Hama Pages: 10
Lab.gruppen NLB 60E Operation Manual preview
NLB 60E
Brand: Lab.gruppen Pages: 35
C&T Solution RCO-3000 Series User Manual preview
RCO-3000 Series
Brand: C&T Solution Pages: 96
TRENDnet TEW-733GR User Manual preview
TEW-733GR
Brand: TRENDnet Pages: 62
Roland Super Sound Set SR-JV80-07 Owner'S Manual preview
Super Sound Set SR-JV80-07
Brand: Roland Pages: 8
Schrack Technik HSERG245GS Instruction Sheet preview
HSERG245GS
Brand: Schrack Technik Pages: 2
Cameo WLG-1801 User Manual preview
WLG-1801
Brand: Cameo Pages: 23
Kaptia Klever Getting Started preview
Klever
Brand: Kaptia Pages: 14
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Brand: Ozenda Pages: 116
IBM Power System H924 Installing Instructions preview
Power System H924
Brand: IBM Pages: 48
Waver WAC52N Quick Start Manual preview
WAC52N
Brand: Waver Pages: 36
Lindy 32116 User Manual preview
32116
Brand: Lindy Pages: 12
XtendLan XL-IPM401 User Manual preview
XL-IPM401
Brand: XtendLan Pages: 21
Ariesys AMK Series User'S Reference Manual preview
AMK Series
Brand: Ariesys Pages: 10
Omron F3SP-U3P-TGR User Manual preview
F3SP-U3P-TGR
Brand: Omron Pages: 29
Datum bc635VME Operation And Technical Manual preview
bc635VME
Brand: Datum Pages: 49

Brands by name

Popular brands

Load more brands