44-22
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
78-13315-02
Chapter 44 Configuring a VoIP Network
Configuring VoIP on a Switch
To configure port voice interface for DHCP, TFTP, and DNS servers, perform this task in privileged
mode:
These examples shows how to configure the port voice interface for DHCP, TFTP, and DNS servers:
Console> (enable)
set port voice interface 7/1 dhcp enable
Port 7/1 DHCP enabled.
Console> (enable)
set port voice interface 7/3 dhcp disable 171.68.111.41/24 tftp
173.32.43.11 dns 172.20.34.204 cisco.com
Port 7/3 dhcp disabled.
System DNS configurations applied.
Console> (enable)
set port voice interface 7/4-6 dhcp enable vlan 3
Vlan 3 configuration successful
Ports 7/4-6 DHCP enabled.
Console> (enable)
Displaying Port Voice Interface
To display the port voice interface configuration, perform this task in privileged mode:
This example shows how to display the port voice interface configuration (this display is from the
24-port FXS analog interface module):
Console>
show port voice interface 5
Port DHCP MAC-Address IP-Address Subnet-Mask
-------- ------- ----------------- --------------- ---------------
5/1-24 disable 00-10-7b-00-13-ea 10.6.15.158 255.255.255.0
Port Call-Manager(s) DHCP-Server TFTP-Server Gateway
-------- ----------------- --------------- --------------- ---------------
5/1-24 10.6.15.155 - 10.6.15.155 -
Port DNS-Server(s) Domain
-------- ----------------- -------------------------------------------------
5/1-24 12.2.2.1* cisco.cisco.com
7.7.7.7
(*): Primary
Console> (enable)
Task
Command
Configure port voice interface for DHCP, TFTP,
and DNS servers.
set port voice interface
mod/port
dhcp enable
[
vlan
vlan
]
set port voice interface
mod/port
dhcp disable
{
ipaddrspec
} {
tftp
ipaddr
} [
vlan
vlan
]
[
gateway
ipaddr
] [
dns
[
ipaddr
] [
domain_name
]]
Task
Command
Display the port voice interface configuration.
show port voice interface
[
mod
[
/port
]]
