20-3
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
78-13315-02
Chapter 20 Administering the Switch
Setting the System Contact and Location
Setting the Static System Prompt
To set the static system prompt, perform this task in privileged mode:
This example shows how to set the static system prompt on the switch:
Console> (enable)
set prompt Catalyst6509>
Catalyst6509> (enable)
Clearing the System Name
To clear the system name, perform this task in privileged mode:
This example shows how to clear the system name:
Console> (enable)
set system name
System name cleared.
Console> (enable)
Setting the System Contact and Location
You can set the system contact and location to help you with resource management tasks.
To set the system contact and location, perform this task in privileged mode:
This example shows how to set the system contact and location and verify the configuration:
Catalyst 6000> (enable)
set system contact [email protected]
System contact set.
Catalyst 6000> (enable)
set system location Sunnyvale CA
System location set.
Catalyst 6000> (enable)
show system
PS1-Status PS2-Status Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout
---------- ---------- ---------- ---------- ---------- -------------- ---------
ok none ok off ok 0,04:04:07 20 min
Task
Command
Set the static system prompt.
set prompt
prompt_string
Task
Command
Clear the system name.
set system name
Task
Command
Step 1
Set the system contact.
set system contact
[
contact_string
]
Step 2
Set the system location.
set system location
[
location_string
]
Step 3
Verify the global system information.
show system
