manualshive.com logo in svg

Cisco TelePresence MX700, Reference Manual

The Cisco TelePresence MX700 is an advanced video conferencing solution designed for immersive collaboration. Ensure seamless installation with our comprehensive Installation Manual, available for free download at [website]. Easily access the manual to set up and optimize your TelePresence MX700, unlocking its full potential for remote communication.

Share
Download
background image

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

95

Cisco TelePresence MX700 and MX800

API Reference Guide

Atlantic, Canada/Central, Canada/East-Saskatchewan, Canada/Eastern, Canada/Mountain, 

Canada/Newfoundland, Canada/Pacific, Canada/Saskatchewan, Canada/Yukon, Chile/

Continental, Chile/EasterIsland, Cuba, EET, EST, EST5EDT, Egypt, Eire, Etc/GMT, Etc/GMT+0, 

Etc/GMT+1, Etc/GMT+10, Etc/GMT+11, Etc/GMT+12, Etc/GMT+2, Etc/GMT+3, Etc/GMT+4, Etc/

GMT+5, Etc/GMT+6, Etc/GMT+7, Etc/GMT+8, Etc/GMT+9, Etc/GMT-0, Etc/GMT-1, Etc/GMT-10, 

Etc/GMT-11, Etc/GMT-12, Etc/GMT-13, Etc/GMT-14, Etc/GMT-2, Etc/GMT-3, Etc/GMT-4, Etc/

GMT-5, Etc/GMT-6, Etc/GMT-7, Etc/GMT-8, Etc/GMT-9, Etc/GMT0, Etc/Greenwich, Etc/UCT, 

Etc/UTC, Etc/Universal, Etc/Zulu, Europe/Amsterdam, Europe/Andorra, Europe/Astrakhan, 

Europe/Athens, Europe/Belfast, Europe/Belgrade, Europe/Berlin, Europe/Bratislava, Europe/

Brussels, Europe/Bucharest, Europe/Budapest, Europe/Busingen, Europe/Chisinau, Europe/

Copenhagen, Europe/Dublin, Europe/Gibraltar, Europe/Guernsey, Europe/Helsinki, Europe/

Isle_of_Man, Europe/Istanbul, Europe/Jersey, Europe/Kaliningrad, Europe/Kiev, Europe/Kirov, 

Europe/Lisbon, Europe/Ljubljana, Europe/London, Europe/Luxembourg, Europe/Madrid, 

Europe/Malta, Europe/Mariehamn, Europe/Minsk, Europe/Monaco, Europe/Moscow, Europe/

Nicosia, Europe/Oslo, Europe/Paris, Europe/Podgorica, Europe/Prague, Europe/Riga, Europe/

Rome, Europe/Samara, Europe/San_Marino, Europe/Sarajevo, Europe/Simferopol, Europe/

Skopje, Europe/Sofia, Europe/Stockholm, Europe/Tallinn, Europe/Tirane, Europe/Tiraspol, 

Europe/Ulyanovsk, Europe/Uzhgorod, Europe/Vaduz, Europe/Vatican, Europe/Vienna, 

Europe/Vilnius, Europe/Volgograd, Europe/Warsaw, Europe/Zagreb, Europe/Zaporozhye, 

Europe/Zurich, GB, GB-Eire, GMT, GMT+0, GMT-0, GMT0, Greenwich, HST, Hongkong, 

Iceland, Indian/Antananarivo, Indian/Chagos, Indian/Christmas, Indian/Cocos, Indian/Comoro, 

Indian/Kerguelen, Indian/Mahe, Indian/Maldives, Indian/Mauritius, Indian/Mayotte, Indian/

Reunion, Iran, Israel, Jamaica, Japan, Kwajalein, Libya, MET, MST, MST7MDT, Mexico/

BajaNorte, Mexico/BajaSur, Mexico/General, NZ, NZ-CHAT, Navajo, PRC, PST8PDT, Pacific/

Apia, Pacific/Auckland, Pacific/Bougainville, Pacific/Chatham, Pacific/Chuuk, Pacific/Easter, 

Pacific/Efate, Pacific/Enderbury, Pacific/Fakaofo, Pacific/Fiji, Pacific/Funafuti, Pacific/

Galapagos, Pacific/Gambier, Pacific/Guadalcanal, Pacific/Guam, Pacific/Honolulu, Pacific/

Johnston, Pacific/Kiritimati, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro, Pacific/

Marquesas, Pacific/Midway, Pacific/Nauru, Pacific/Niue, Pacific/Norfolk, Pacific/Noumea, 

Pacific/Pago_Pago, Pacific/Palau, Pacific/Pitcairn, Pacific/Pohnpei, Pacific/Ponape, Pacific/

Port_Moresby, Pacific/Rarotonga, Pacific/Saipan, Pacific/Samoa, Pacific/Tahiti, Pacific/

Tarawa, Pacific/Tongatapu, Pacific/Truk, Pacific/Wake, Pacific/Wallis, Pacific/Yap, Poland, 

Portugal, ROC, ROK, Singapore, Turkey, UCT, US/Alaska, US/Aleutian, US/Arizona, US/

Central, US/East-Indiana, US/Eastern, US/Hawaii, US/Indiana-Starke, US/Michigan, US/

Mountain, US/Pacific, US/Pacific-New, US/Samoa, UTC, Universal, W-SU, WET, Zulu

Select a time zone from the list.

xConfiguration Time WorkDay Start

The Time WorkWeek FirstDayOfWeek, Time WorkWeek LastDayOfWeek, Time WorkDay Start, 

and Time WorkDay End settings are available so that you can specify when the regular working 

hours are, and thereby also find the out-of-office hours.
Knowing the out-of-office hours is required if you want to use the power save mode, which is 

set up using the Standby PowerSave setting.

Requires user role: ADMIN, USER
Default value: "07:00"

USAGE:

xConfiguration Time WorkDay Start: "

Start

"

where

Start

: String (5, 5)

The working day start time, using the 24-hour clock. Example: "07:00"

xConfiguration Time WorkDay End

The Time WorkWeek FirstDayOfWeek, Time WorkWeek LastDayOfWeek, Time WorkDay Start, 

and Time WorkDay End settings are available so that you can specify when the regular working 

hours are, and thereby also find the out-of-office hours.
Knowing the out-of-office hours is required if you want to use the power save mode, which is 

set up using the Standby PowerSave setting.

Requires user role: ADMIN, USER
Default value: "18:00"

USAGE:

xConfiguration Time WorkDay End: "

End

"

where

End

: String (5, 5)

The working day end time, using the 24-hour clock. Example: "16:00"

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Summary of Contents for TelePresence MX700


















































































































































































































































Reviews:

No comments

Related manuals for TelePresence MX700

Samsung Galaxy light Easy Manual preview
Galaxy light
Brand: Samsung Pages: 44
Olympus 170 Instructions Manual preview
170
Brand: Olympus Pages: 69
Garmin BC 40 Quick Start Manual preview
BC 40
Brand: Garmin Pages: 8
ARTRAY ARTCAM-990SWIR-TEC-CL Setting Manual preview
ARTCAM-990SWIR-TEC-CL
Brand: ARTRAY Pages: 17
Motec HD-VCS Technical Notes preview
HD-VCS
Brand: Motec Pages: 4
Olympus CAMEDIA C-3030ZOOM Instructions Manual preview
CAMEDIA C-3030ZOOM
Brand: Olympus Pages: 229
Oregon Scientific DS-3868 Operation User'S Manual preview
DS-3868
Brand: Oregon Scientific Pages: 2
Casio Exilim EX-ZR700 User Manual preview
Exilim EX-ZR700
Brand: Casio Pages: 196
FujiFilm ZoomDate 120v Owner'S Manual preview
ZoomDate 120v
Brand: FujiFilm Pages: 60
Bushnell TRAIL SENTRY 119303 Instruction Manual preview
TRAIL SENTRY 119303
Brand: Bushnell Pages: 16
NED XCM2085DLCT3 User Manual preview
XCM2085DLCT3
Brand: NED Pages: 90
JENDIGITAL C 3.0 C User Manual preview
C 3.0 C
Brand: JENDIGITAL Pages: 30
Camouflage EZ-Solar Instructions Manual preview
EZ-Solar
Brand: Camouflage Pages: 36
Launch ShortCam LC-AS21 Mini User Manual preview
ShortCam LC-AS21 Mini
Brand: Launch Pages: 9
Argus DCM-098 User Manual preview
DCM-098
Brand: Argus Pages: 16
Cobra FV-CV1 Quick Start Manual preview
FV-CV1
Brand: Cobra Pages: 12
Cobra DC1120 Manual preview
DC1120
Brand: Cobra Pages: 18
Cobra DC125 User Manual preview
DC125
Brand: Cobra Pages: 22

Brands by name

Popular brands

Load more brands