Cisco TelePresence MX700 Reference Manual Download Page 16

Page: 16 / 241

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.

Cisco TelePresence MX700 and MX800

API Reference Guide

New features and improvements

Updated user interface

The user interfaces on the Touch 10, on screen, and on the

integrated touch screen have been updated. The main menu

items on the home screen have been replaced with more

prominent activities.
Some of the setting have been removed from the Touch 10

advanced settings menu to align with the on-screen display

menu.

Wakeup on motion detection

Wakeup on motion detection senses when a person

walks into the conference room and the system wakes up

automatically. You need to enable the following setting for this

feature to work:

xConfiguration Standby WakeupOnMotionDetection

You can’t manually place the system in standby when this

feature is enabled.

Updated In-Room Control Editor

The In-Room Control editor is updated with a new look,

improved logic and usability for producing a control interface

more efficiently. In addition, a new directional pad widget and

an In-Room Control simulator is added.

Added language support

We have added support for Potuguese (Portugal) to the

on-screen display and Touch controller menus.

Other changes

• Support for HTTPS client certificates has been added.
• Unplugging the presentation cable instantly stops the

presentation sharing.

What’s new in CE9.0

This section provides an overview of the new and changed

system settings, and the new features and improvements

in the Cisco Collaboration Endpoint software version 9.0

(CE9.0) compared to CE8.3.
For more details, we recommend reading the Software

release notes:



http://www.cisco.com/c/en/us/support/

collaboration-endpoints/telepresence-mx-series/

products-release-notes-list.html

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



Introduction

Summary of Contents for TelePresence MX700


















































































































































































































































Search results

Summary of Contents for TelePresence MX700

Reviews:

Related manuals for TelePresence MX700

Brands by name

Popular brands

Cisco TelePresence MX700, Reference Manual

Search results

Summary of Contents for TelePresence MX700

Reviews:

Related manuals for TelePresence MX700

Brands by name

Popular brands