manualshive.com logo in svg

Cisco TelePresence MX700, Reference Manual

The Cisco TelePresence MX700 is an advanced video conferencing solution designed for immersive collaboration. Ensure seamless installation with our comprehensive Installation Manual, available for free download at [website]. Easily access the manual to set up and optimize your TelePresence MX700, unlocking its full potential for remote communication.

Share
Download
background image

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

75

Cisco TelePresence MX700 and MX800

API Reference Guide

xConfiguration NetworkServices HTTP Mode

Define whether or not to allow access to the video system using the HTTP or HTTPS (HTTP 

Secure) protocols. Note that the video system's web interface use HTTP or HTTPS. If this 

setting is switched Off, you cannot use the web interface.

If you need extra security (encryption and decryption of requests, and pages that are returned 

by the web server), allow only HTTPS.

Requires user role: ADMIN
Default value: HTTP+HTTPS

USAGE:

xConfiguration NetworkServices HTTP Mode: 

Mode

where

Mode

: Off/HTTP+HTTPS/HTTPS
Off: Access to the video system not allowed via HTTP or HTTPS.
HTTP+HTTPS: Access to the video system allowed via both HTTP and HTTPS.
HTTPS: Access to the video system allowed via HTTPS, but not via HTTP.

xConfiguration NetworkServices HTTP Proxy Allowed

The HTTP Proxy Settings are available from the user interface when the system is provisioned 

to Cisco Spark. The HTTP proxy settings makes it possible to onboard a video system behind a 

HTTP proxy to Spark.

Requires user role: ADMIN, USER
Default value: True

USAGE:

xConfiguration NetworkServices HTTP Proxy Allowed: 

Allowed

where

Allowed

: False/True

False: The HTTP proxy settings are not available from the Cisco Spark setup wizard. 

True: The HTTP proxy settings are available from the Cisco Spark setup wizard.

xConfiguration NetworkServices HTTP Proxy LoginName

This is the user name part of the credentials for authentication towards the HTTP proxy. 

Requires that the NetworkServices HTTP Proxy Mode is set to Manual.

Requires user role: ADMIN, USER
Default value: ""

USAGE:

xConfiguration NetworkServices HTTP Proxy LoginName: "

LoginName

"

where

LoginName

: String (0, 80)

The authentication login name.

xConfiguration NetworkServices HTTP Proxy Password

This is the password part of the credentials for authentication towards the HTTP proxy. 

Requires that the NetworkServices HTTP Proxy Mode is set to Manual.

Requires user role: ADMIN, USER
Default value: ""

USAGE:

xConfiguration NetworkServices HTTP Proxy Password: "

Password

"

where

Password

: String (0, 64)

The authentication password.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Summary of Contents for TelePresence MX700


















































































































































































































































Reviews:

No comments

Related manuals for TelePresence MX700

Olympus HDL-7 Instructions Manual preview
HDL-7
Brand: Olympus Pages: 9
Olympus Infinity Zoom 210 Instructions Manual preview
Infinity Zoom 210
Brand: Olympus Pages: 50
ZowieTek 90481-980 Quick Start Manual preview
90481-980
Brand: ZowieTek Pages: 14
T'nB KIDSCAM Instructions Manual preview
KIDSCAM
Brand: T'nB Pages: 26
Genius DSC13M SMART Service Manual preview
DSC13M SMART
Brand: Genius Pages: 17
nerian Karmin3 User Manual preview
Karmin3
Brand: nerian Pages: 10
Balluff SMARTCAMERA IO User Manual preview
SMARTCAMERA IO
Brand: Balluff Pages: 34
Panasonic SQC0410 Quick Manual preview
SQC0410
Brand: Panasonic Pages: 2
Panasonic Lumix DMC-GM1SK Quick Manual preview
Lumix DMC-GM1SK
Brand: Panasonic Pages: 44
Panasonic WV-BWC4000 Important Information Manual preview
WV-BWC4000
Brand: Panasonic Pages: 28
Panasonic PVDC1080 - DIGITAL STILL CAMERA User Manual preview
PVDC1080 - DIGITAL STILL CAMERA
Brand: Panasonic Pages: 40
Panasonic PVDC3010 - DIGITAL STILL CAMERA User Manual preview
PVDC3010 - DIGITAL STILL CAMERA
Brand: Panasonic Pages: 64
Panasonic PVDC3000A User Manual preview
PVDC3000A
Brand: Panasonic Pages: 64
Panasonic SuperDisk PV-SD5000 Operating Instructions Manual preview
SuperDisk PV-SD5000
Brand: Panasonic Pages: 76
Panasonic PVSD5000 - SUPER DISK DIGITAL C User Manual preview
PVSD5000 - SUPER DISK DIGITAL C
Brand: Panasonic Pages: 76
Panasonic S-S50 Operating Instructions Manual preview
S-S50
Brand: Panasonic Pages: 92
Panasonic VDR-D105 Operating Instructions Manual preview
VDR-D105
Brand: Panasonic Pages: 108
Panasonic VQT1T63 Operating Instructions Manual preview
VQT1T63
Brand: Panasonic Pages: 210

Brands by name

Popular brands

Load more brands