D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
159
Cisco TelePresence MX700 and MX800
API Reference Guide
Enter the text to appear on the feedback options.
Option.4:
String (0, 255)
Enter the text to appear on the feedback options.
Option.5:
String (0, 255)
Enter the text to appear on the feedback options.
xCommand UserInterface Message Prompt Response
Give a response to the xCommand Message Prompt Display.
Use the xFeedback commands to monitor the feedback from the user. Read more about the
xFeedback commands in the API introduction section in this guide.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Message Prompt Response [FeedbackId: "
FeedbackId
"]
OptionId:
OptionId
where
FeedbackId:
String (0, 255)
The FeedbackId corresponds to the FeedbackId given by the xCommand Message
Prompt Display command.
OptionId:
Integer (1..5)
The OptionId corresponds to the OptionIds given as possible responses in the
xCommand Message Prompt Display command.
xCommand UserInterface Message TextInput Clear
Removes the text input message.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Message TextInput Clear
xCommand UserInterface Message TextInput Display
Displays an input dialog box to which a user can respond, on the Cisco Telepresence Touch 10
and on the main screen of the Cisco DX80.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Message TextInput Display [Duration:
Duration
]
FeedbackId: "
FeedbackId
" [InputType:
InputType
] [KeyboardState:
KeyboardState
]
[Placeholder: "
Placeholder
"] [SubmitText: "
SubmitText
"] Text: "
Text
" [Title:
"Title"]
where
Duration:
Integer (0..3600)
Set how long (in seconds) the message is to be displayed on the screen. If set to 0
(zero) the message does not disappear until the xCommand UserInterface Message
TextInput Clear message has been sent. The default is set to 0.
FeedbackId:
String (0..255)
To identify the feedback enter a FeedbackId.
InputType:
Literal (SingleLine / Numeric / Password / PIN)
Sets the type of text input dialog box that is displayed. This also determines the
keyboard layout that it displayed. The default is set to SingleLine.
KeyboardState:
Literal (Open / Closed)
Specifies if the device’s keyboard should open when the text input message displays.
The default is set to Open.
Placeholder:
String (0..255)
Contains the placeholder text displayed in the input dialog box before it is focused.
SubmitText:
String (0..32)
The text that is shown on the green Submit button on the keyboard. The default is set to
OK.
Text:
String (0..128)
The message that is to be displayed to the user.
Title:
String (0..40)
The title of the input dialog box.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand
