Cisco TelePresence MX700 Reference Manual Download Page 100

Page: 100 / 241

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.

100

Cisco TelePresence MX700 and MX800

API Reference Guide

xConfiguration UserManagement LDAP Admin Filter

The LDAP filter is used to determine which users should be granted administrator privileges. If

set, this setting takes precedence over the UserManagement LDAP Admin Group setting.

Requires user role: ADMIN
Default value: ""

USAGE:

xConfiguration UserManagement LDAP Admin Filter: "

Filter

where

Filter

: String (0, 1024)

Refer to the LDAP specification for the syntax of this string. Example: "(CN=adminuser)"

xConfiguration UserManagement LDAP Admin Group

Members of this AD (Active Directory) group will be given administrator access. This

setting is a shorthand for saying (memberOf:1.2.840.113556.1.4.1941:=<group name>). If

UserManagement LDAP Admin Filter is set, this setting is ignored.

Requires user role: ADMIN
Default value: ""

USAGE:

xConfiguration UserManagement LDAP Admin Group: "

Group

where

Group

: String (0, 255)

The distinguishing name of the AD group. Example: "CN=admin_group, OU=company

groups, DC=company, DC=com"

xConfiguration UserManagement LDAP Attribute

The attribute used to map to the provided username. If not set, sAMAccountName is used.

Requires user role: ADMIN
Default value: ""

USAGE:

xConfiguration UserManagement LDAP Attribute: "

Attribute

where

Attribute

: String (0, 255)

The attribute name.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



xConfiguration

Summary of Contents for TelePresence MX700


















































































































































































































































Search results

Summary of Contents for TelePresence MX700

Reviews:

Related manuals for TelePresence MX700

Brands by name

Popular brands

Cisco TelePresence MX700, Reference Manual

Search results

Summary of Contents for TelePresence MX700

Reviews:

Related manuals for TelePresence MX700

Brands by name

Popular brands