manualshive.com logo in svg

Cisco TelePresence MX700, Reference Manual

The Cisco TelePresence MX700 is an advanced video conferencing solution designed for immersive collaboration. Ensure seamless installation with our comprehensive Installation Manual, available for free download at [website]. Easily access the manual to set up and optimize your TelePresence MX700, unlocking its full potential for remote communication.

Share
Download
background image

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

201

Cisco TelePresence MX700 and MX800

API Reference Guide

xStatus MediaChannels Call [n] Channel [n] NetStat ChannelRate

Shows the bandwidth for audio, video or data on the incoming or outgoing channel.

Requires user role: ADMIN, USER

Value space of the result returned: 

Integer

Example:

 

xStatus MediaChannels Call 27 Channel 327 NetStat ChannelRate

*s MediaChannels Call 27 Channel 327 NetStat ChannelRate: 128000

** end

xStatus MediaChannels Call [n] Channel [n] NetStat Jitter

Shows the jitter for audio, video or data at the present moment on the incoming or outgoing 

channel, as specified by RFC 3550.

Requires user role: ADMIN, USER

Value space of the result returned: 

Integer

Example:

 

xStatus MediaChannels Call 27 Channel 327 NetStat Jitter

*s MediaChannels Call 27 Channel 327 NetStat Jitter: 2

** end

xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalLost

Shows the number of packets lost for audio, video or data during the last interval on the incom-

ing or outgoing channels.

Requires user role: ADMIN, USER

Value space of the result returned: 

Integer

Example:

 

xStatus MediaChannels Call 27 Channel 327 NetStat LastIntervalLost

*s MediaChannels Call 27 Channel 327 NetStat LastIntervalLost: 0

** end

xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalReceived

Shows the number of packets received for audio, video or data during the last interval on the 

incoming or outgoing channels.

Requires user role: ADMIN, USER

Value space of the result returned: 

Integer

Example:

 

xStatus MediaChannels Call 27 Channel 327 NetStat LastIntervalReceived

*s MediaChannels Call 27 Channel 327 NetStat LastIntervalReceived: 289

** end

xStatus MediaChannels Call [n] Channel [n] NetStat Loss

Shows the number of packets lost for audio, video or data on the incoming or outgoing 

channels.

Requires user role: ADMIN, USER

Value space of the result returned: 

Integer

Example:

 

xStatus MediaChannels Call 27 Channel 327 NetStat Loss

*s MediaChannels Call 27 Channel 327 NetStat Loss: 0

** end

xStatus MediaChannels Call [n] Channel [n] NetStat MaxJitter

Shows the maximum jitter for audio, video or data that has been measured during last interval 

(about 5 seconds).

Requires user role: ADMIN, USER

Value space of the result returned: 

Integer

Example:

 

xStatus MediaChannels Call 27 Channel 327 NetStat MaxJitter

*s MediaChannels Call 27 Channel 327 NetStat MaxJitter: 2

** end

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xStatus

Summary of Contents for TelePresence MX700


















































































































































































































































Reviews:

No comments

Related manuals for TelePresence MX700

Kamera Werk Dresden CMOS Manual preview
CMOS
Brand: Kamera Werk Dresden Pages: 46
Olympus Tough TG-820 iHS Manual De Instrucciones preview
Tough TG-820 iHS
Brand: Olympus Pages: 81
Olympus STYLUS-7030 Quick Start Manual preview
STYLUS-7030
Brand: Olympus Pages: 2
Olympus STYLUS-7030 Manuel D'Instructions preview
STYLUS-7030
Brand: Olympus Pages: 72
Olympus STYLUS-7030 Manual Del Instrucción preview
STYLUS-7030
Brand: Olympus Pages: 72
Olympus u 1200 Instruction Manual preview
u 1200
Brand: Olympus Pages: 84
Delta JK-309 User Manual preview
JK-309
Brand: Delta Pages: 2
FujiFilm FINEPIX J27 Owner'S Manual preview
FINEPIX J27
Brand: FujiFilm Pages: 125
Teltonika GSM Camera Quick Start Manual preview
GSM Camera
Brand: Teltonika Pages: 4
FujiFilm FINEPIX F200 EXR Owner'S Manual preview
FINEPIX F200 EXR
Brand: FujiFilm Pages: 135
Concord Camera 4340z User Manual preview
4340z
Brand: Concord Camera Pages: 57
Pentax Z-70 Operating Manual preview
Z-70
Brand: Pentax Pages: 98
Casio QV-780 Service Manual & Parts List preview
QV-780
Brand: Casio Pages: 41
Advent MP51 Manual preview
MP51
Brand: Advent Pages: 13
Datalogic MX-U100 Hardware Manual preview
MX-U100
Brand: Datalogic Pages: 64
Nikon COOLPIX L1 User Manual preview
COOLPIX L1
Brand: Nikon Pages: 95
Olympus IR 300 - Digital Camera - 5.0 Megapixel Quick Start Manual preview
IR 300 - Digital Camera - 5.0 Megapixel
Brand: Olympus Pages: 2
Pentax 19361 - Optio A40 Digital Camera Operating Manual preview
19361 - Optio A40 Digital Camera
Brand: Pentax Pages: 215

Brands by name

Popular brands

Load more brands