D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
85
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Provisioning ExternalManager Path
Define the Path to the external manager / provisioning system. This setting is required when
several management services reside on the same server, i.e. share the same External Manager
address.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Path: "
Path
"
where
Path
: String (0, 255)
A valid path to the external manager or provisioning system.
xConfiguration Provisioning ExternalManager Domain
Define the SIP domain for the VCS provisioning server.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Domain: "
Domain
"
where
Domain
: String (0, 64)
A valid domain name.
Proximity configuration
xConfiguration Proximity Mode
Determine whether the video system will emit ultrasound pairing messages or not.
When the video system emits ultrasound, Proximity clients can detect that they are close to the
video system. In order to use a client, at least one of the Proximity services must be enabled
(refer to the Proximity Services settings). In general, Cisco recommends enabling all the
Proximity services.
Requires user role: ADMIN, USER
Default value: On
USAGE:
xConfiguration Proximity Mode:
Mode
where
Mode
: Off/On
Off: The video system does not emit ultrasound, and Proximity services cannot be used.
On: The video system emits ultrasound, and Proximity clients can detect that they are
close to the video system. Enabled Proximity services can be used.
xConfiguration Proximity Services CallControl
Enable or disable basic call control features on Proximity clients. When this setting is enabled,
you are able to control a call using a Proximity client (for example dial, mute, adjust volume and
hang up). This service is supported by mobile devices (iOS and Android). Proximity Mode must
be On for this setting to take any effect.
Requires user role: ADMIN, USER
Default value: Disabled
USAGE:
xConfiguration Proximity Services CallControl:
CallControl
where
CallControl
: Enabled/Disabled
Enabled: Call control from a Proximity client is enabled.
Disabled: Call control from a Proximity client is disabled.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration
