D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
91
Cisco TelePresence MX700 and MX800
API Reference Guide
Standby configuration
xConfiguration Standby Control
Define whether the system should go into standby mode or not.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Standby Control:
Control
where
Control
: Off/On
Off: The system will not enter standby mode.
On: The system will enter standby mode when the Standby Delay has timed out.
Requires the Standby Delay to be set to an appropriate value.
xConfiguration Standby Delay
Define how long (in minutes) the system shall be in idle mode before it goes into standby mode.
Requires the Standby Control to be enabled.
Requires user role: ADMIN, INTEGRATOR
Default value: 10
USAGE:
xConfiguration Standby Delay:
Delay
where
Delay
: Integer (1..480)
Set the standby delay (minutes).
xConfiguration Standby BootAction
Define the camera position after a restart of the codec.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: DefaultCameraPosition
USAGE:
xConfiguration Standby BootAction:
BootAction
where
BootAction
: None/DefaultCameraPosition/RestoreCameraPosition
None: No action.
RestoreCameraPosition: When the video system restarts, the camera returns to the
position that it had before the restart.
DefaultCameraPosition: When the video system restarts, the camera moves to the
factory default position.
xConfiguration Standby StandbyAction
Define the camera position when going into standby mode.
Requires user role: ADMIN, INTEGRATOR
Default value: PrivacyPosition
USAGE:
xConfiguration Standby StandbyAction:
StandbyAction
where
StandbyAction
: None/PrivacyPosition
None: No action.
PrivacyPosition: When the video system enters standby, the camera turns to a sideways
position for privacy.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration
