Cisco TelePresence MX700 Reference Manual Download Page 94

Page: 94 / 241

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.

Cisco TelePresence MX700 and MX800

API Reference Guide

xConfiguration Time Zone

Define the time zone for the geographical location of the video system. The information in the

value space is from the tz database, also called the IANA Time Zone Database.

Requires user role: ADMIN, INTEGRATOR, USER
Default value: Etc/UTC

USAGE:

xConfiguration Time Zone:

Zone

where

Zone

: Africa/Abidjan, Africa/Accra, Africa/Addis_Ababa, Africa/Algiers, Africa/Asmara, Africa/

Asmera, Africa/Bamako, Africa/Bangui, Africa/Banjul, Africa/Bissau, Africa/Blantyre, Africa/

Brazzaville, Africa/Bujumbura, Africa/Cairo, Africa/Casablanca, Africa/Ceuta, Africa/Conakry,

Africa/Dakar, Africa/Dar_es_Salaam, Africa/Djibouti, Africa/Douala, Africa/El_Aaiun, Africa/

Freetown, Africa/Gaborone, Africa/Harare, Africa/Johannesburg, Africa/Juba, Africa/

Kampala, Africa/Khartoum, Africa/Kigali, Africa/Kinshasa, Africa/Lagos, Africa/Libreville,

Africa/Lome, Africa/Luanda, Africa/Lubumbashi, Africa/Lusaka, Africa/Malabo, Africa/Maputo,

Africa/Maseru, Africa/Mbabane, Africa/Mogadishu, Africa/Monrovia, Africa/Nairobi, Africa/

Ndjamena, Africa/Niamey, Africa/Nouakchott, Africa/Ouagadougou, Africa/Porto-Novo,

Africa/Sao_Tome, Africa/Timbuktu, Africa/Tripoli, Africa/Tunis, Africa/Windhoek, America/

Adak, America/Anchorage, America/Anguilla, America/Antigua, America/Araguaina, America/

Argentina/Buenos_Aires, America/Argentina/Catamarca, America/Argentina/

ComodRivadavia, America/Argentina/Cordoba, America/Argentina/Jujuy, America/Argentina/

La_Rioja, America/Argentina/Mendoza, America/Argentina/Rio_Gallegos, America/

Argentina/Salta, America/Argentina/San_Juan, America/Argentina/San_Luis, America/

Argentina/Tucuman, America/Argentina/Ushuaia, America/Aruba, America/Asuncion,

America/Atikokan, America/Atka, America/Bahia, America/Bahia_Banderas, America/

Barbados, America/Belem, America/Belize, America/Blanc-Sablon, America/Boa_Vista,

America/Bogota, America/Boise, America/Buenos_Aires, America/Cambridge_Bay,

America/Campo_Grande, America/Cancun, America/Caracas, America/Catamarca,

America/Cayenne, America/Cayman, America/Chicago, America/Chihuahua, America/

Coral_Harbour, America/Cordoba, America/Costa_Rica, America/Creston, America/Cuiaba,

America/Curacao, America/Danmarkshavn, America/Dawson, America/Dawson_Creek,

America/Denver, America/Detroit, America/Dominica, America/Edmonton, America/Eirunepe,

America/El_Salvador, America/Ensenada, America/Fort_Nelson, America/Fort_Wayne,

America/Fortaleza, America/Glace_Bay, America/Godthab, America/Goose_Bay, America/

Grand_Turk, America/Grenada, America/Guadeloupe, America/Guatemala, America/

Guayaquil, America/Guyana, America/Halifax, America/Havana, America/Hermosillo,

America/Indiana/Indianapolis, America/Indiana/Knox, America/Indiana/Marengo, America/

Indiana/Petersburg, America/Indiana/Tell_City, America/Indiana/Vevay, America/Indiana/

Vincennes, America/Indiana/Winamac, America/Indianapolis, America/Inuvik, America/Iqaluit,

America/Jamaica, America/Jujuy, America/Juneau, America/Kentucky/Louisville, America/

Kentucky/Monticello, America/Knox_IN, America/Kralendijk, America/La_Paz, America/Lima,

America/Los_Angeles, America/Louisville, America/Lower_Princes, America/Maceio,

America/Managua, America/Manaus, America/Marigot, America/Martinique, America/

Matamoros, America/Mazatlan, America/Mendoza, America/Menominee, America/Merida,

America/Metlakatla, America/Mexico_City, America/Miquelon, America/Moncton, America/

Monterrey, America/Montevideo, America/Montreal, America/Montserrat, America/Nassau,

America/New_York, America/Nipigon, America/Nome, America/Noronha, America/North_

Dakota/Beulah, America/North_Dakota/Center, America/North_Dakota/New_Salem,

America/Ojinaga, America/Panama, America/Pangnirtung, America/Paramaribo, America/

Phoenix, America/Port-au-Prince, America/Port_of_Spain, America/Porto_Acre, America/

Porto_Velho, America/Puerto_Rico, America/Rainy_River, America/Rankin_Inlet, America/

Recife, America/Regina, America/Resolute, America/Rio_Branco, America/Rosario, America/

Santa_Isabel, America/Santarem, America/Santiago, America/Santo_Domingo, America/

Sao_Paulo, America/Scoresbysund, America/Shiprock, America/Sitka, America/St_

Barthelemy, America/St_Johns, America/St_Kitts, America/St_Lucia, America/St_Thomas,

America/St_Vincent, America/Swift_Current, America/Tegucigalpa, America/Thule,

America/Thunder_Bay, America/Tijuana, America/Toronto, America/Tortola, America/

Vancouver, America/Virgin, America/Whitehorse, America/Winnipeg, America/Yakutat,

America/Yellowknife, Antarctica/Casey, Antarctica/Davis, Antarctica/DumontDUrville,

Antarctica/Macquarie, Antarctica/Mawson, Antarctica/McMurdo, Antarctica/Palmer,

Antarctica/Rothera, Antarctica/South_Pole, Antarctica/Syowa, Antarctica/Troll, Antarctica/

Vostok, Arctic/Longyearbyen, Asia/Aden, Asia/Almaty, Asia/Amman, Asia/Anadyr, Asia/Aqtau,

Asia/Aqtobe, Asia/Ashgabat, Asia/Ashkhabad, Asia/Baghdad, Asia/Bahrain, Asia/Baku, Asia/

Bangkok, Asia/Barnaul, Asia/Beirut, Asia/Bishkek, Asia/Brunei, Asia/Calcutta, Asia/Chita,

Asia/Choibalsan, Asia/Chongqing, Asia/Chungking, Asia/Colombo, Asia/Dacca, Asia/

Damascus, Asia/Dhaka, Asia/Dili, Asia/Dubai, Asia/Dushanbe, Asia/Gaza, Asia/Harbin, Asia/

Hebron, Asia/Ho_Chi_Minh, Asia/Hong_Kong, Asia/Hovd, Asia/Irkutsk, Asia/Istanbul, Asia/

Jakarta, Asia/Jayapura, Asia/Jerusalem, Asia/Kabul, Asia/Kamchatka, Asia/Karachi, Asia/

Kashgar, Asia/Kathmandu, Asia/Katmandu, Asia/Khandyga, Asia/Kolkata, Asia/Krasnoyarsk,

Asia/Kuala_Lumpur, Asia/Kuching, Asia/Kuwait, Asia/Macao, Asia/Macau, Asia/Magadan,

Asia/Makassar, Asia/Manila, Asia/Muscat, Asia/Nicosia, Asia/Novokuznetsk, Asia/Novosibirsk,

Asia/Omsk, Asia/Oral, Asia/Phnom_Penh, Asia/Pontianak, Asia/Pyongyang, Asia/Qatar, Asia/

Qyzylorda, Asia/Rangoon, Asia/Riyadh, Asia/Saigon, Asia/Sakhalin, Asia/Samarkand, Asia/

Seoul, Asia/Shanghai, Asia/Singapore, Asia/Srednekolymsk, Asia/Taipei, Asia/Tashkent,

Asia/Tbilisi, Asia/Tehran, Asia/Tel_Aviv, Asia/Thimbu, Asia/Thimphu, Asia/Tokyo, Asia/Tomsk,

Asia/Ujung_Pandang, Asia/Ulaanbaatar, Asia/Ulan_Bator, Asia/Urumqi, Asia/Ust-Nera, Asia/

Vientiane, Asia/Vladivostok, Asia/Yakutsk, Asia/Yekaterinburg, Asia/Yerevan, Atlantic/Azores,

Atlantic/Bermuda, Atlantic/Canary, Atlantic/Cape_Verde, Atlantic/Faeroe, Atlantic/Faroe,

Atlantic/Jan_Mayen, Atlantic/Madeira, Atlantic/Reykjavik, Atlantic/South_Georgia, Atlantic/

St_Helena, Atlantic/Stanley, Australia/ACT, Australia/Adelaide, Australia/Brisbane, Australia/

Broken_Hill, Australia/Canberra, Australia/Currie, Australia/Darwin, Australia/Eucla, Australia/

Hobart, Australia/LHI, Australia/Lindeman, Australia/Lord_Howe, Australia/Melbourne,

Australia/NSW, Australia/North, Australia/Perth, Australia/Queensland, Australia/South,

Australia/Sydney, Australia/Tasmania, Australia/Victoria, Australia/West, Australia/

Yancowinna, Brazil/Acre, Brazil/DeNoronha, Brazil/East, Brazil/West, CET, CST6CDT, Canada/

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



xConfiguration

Summary of Contents for TelePresence MX700


















































































































































































































































Search results

Summary of Contents for TelePresence MX700

Reviews:

Related manuals for TelePresence MX700

Brands by name

Popular brands

Cisco TelePresence MX700, Reference Manual

Search results

Summary of Contents for TelePresence MX700

Reviews:

Related manuals for TelePresence MX700

Brands by name

Popular brands