manualshive.com logo in svg

Cisco TelePresence MX700, Reference Manual

The Cisco TelePresence MX700 is an advanced video conferencing solution designed for immersive collaboration. Ensure seamless installation with our comprehensive Installation Manual, available for free download at [website]. Easily access the manual to set up and optimize your TelePresence MX700, unlocking its full potential for remote communication.

Share
Download
background image

D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

2

Cisco TelePresence MX700 and MX800

API Reference Guide

Table of Contents

What’s in this guide? 

The top menu bar and the entries in the table of contents are 

all hyperlinks, just click on them to go to the topic.

We recommend you visit our web site regularly for updated 

versions of the user documentation. 
Go to:

http://www.cisco.com/go/mx-docs

Introduction ...........................................................................3

About this guide ......................................................................4

Downloading the user documentation .................................4

What’s new in CE9.2 ...............................................................5
What’s new in CE9.1 ............................................................. 12
What’s new in CE9.0 .............................................................16

About the API ...................................................................... 21

API fundamentals ..................................................................22

Connecting to the API ........................................................22

Password ............................................................................22

SSH ....................................................................................22

Telnet ..................................................................................22

HTTP/HTTPS ......................................................................22

RS-232 / serial connection ................................................23

User roles ...........................................................................23

API output .............................................................................24

The output modes ..............................................................24

Using the command line .......................................................25

API commands ...................................................................25

Other commands................................................................25

Command line shortcuts ....................................................26

Searching ...........................................................................26

Value types and formats.....................................................26

Commands ............................................................................27
Configurations .......................................................................27
Status ....................................................................................27
Multiline commands ..............................................................28
Synchronous API calls ..........................................................29
Events ...................................................................................30

Feedback mechanism ...........................................................31

Feedback expressions .......................................................31

Terminal connections .........................................................32

HTTP XMLAPI Authentication .............................................33

HTTP XMLAPI Session Authentication ...............................33

Getting status and configurations ......................................34

Sending commands and configurations .............................34

Feedback from codec over HTTP .........................................35

Registering for feedback ....................................................35

Translating from terminal mode to XML .............................36

Dos and don’ts ......................................................................37

xConfiguration commands ..................................................38

Description of the xConfiguration commands ......................39

xCommand commands ..................................................... 108

Description of the xCommand commands .........................109

xStatus commands ........................................................... 172

Description of the xStatus commands ................................ 173

Appendices .......................................................................235

About startup scripts ..........................................................236
The SystemTools commands ..............................................237
About disconnect cause types ...........................................239
User documentation on the Cisco web site ........................240

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

Summary of Contents for TelePresence MX700


















































































































































































































































Reviews:

No comments

Related manuals for TelePresence MX700

Samsung i85 Manual De Usuario preview
i85
Brand: Samsung Pages: 129
Samsung ES60 User Manual preview
ES60
Brand: Samsung Pages: 98
Olympus TG-2 Specifications preview
TG-2
Brand: Olympus Pages: 4
Olympus TG-830 Instruction Manual preview
TG-830
Brand: Olympus Pages: 101
Olympus TG-4 Instruction Manual preview
TG-4
Brand: Olympus Pages: 121
Olympus TG-320 Instruction Manual preview
TG-320
Brand: Olympus Pages: 82
Olympus T-110 Manuel D'Instructions preview
T-110
Brand: Olympus Pages: 73
Olympus T-10 Manuel D'Instructions preview
T-10
Brand: Olympus Pages: 70
Olympus SZ-12 Manuel D'Instructions preview
SZ-12
Brand: Olympus Pages: 78
Olympus SZ-14, SZ-12 Instruction Manual preview
SZ-14, SZ-12
Brand: Olympus Pages: 80
Olympus Stylus TG-Tracker Instruction Manual preview
Stylus TG-Tracker
Brand: Olympus Pages: 79
Olympus SP-620UZ Manuel D'Instructions preview
SP-620UZ
Brand: Olympus Pages: 74
Olympus SP-620UZ Manual De Instrucciones preview
SP-620UZ
Brand: Olympus Pages: 74
Olympus SP-610UZ Manuel D'Instructions preview
SP-610UZ
Brand: Olympus Pages: 82
Olympus SP-590 UZ - Digital Camera - Compact Manual De Instrucciones preview
SP-590 UZ - Digital Camera - Compact
Brand: Olympus Pages: 86
Olympus SP-600UZ Manual De Instrucciones preview
SP-600UZ
Brand: Olympus Pages: 69
Olympus SP-565 UZ Manual De Instrucciones preview
SP-565 UZ
Brand: Olympus Pages: 94
Olympus SP-565 UZ Specifications preview
SP-565 UZ
Brand: Olympus Pages: 4

Brands by name

Popular brands

Load more brands