D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
145
Cisco TelePresence MX700 and MX800
API Reference Guide
Presentation commands
xCommand Presentation Start
Open a media stream from the selected presentation source.
Requires user role: ADMIN, USER
USAGE:
xCommand Presentation Start [PresentationSource:
PresentationSource
]
[SendingMode:
SendingMode
] [ConnectorId:
ConnectorId
] [Instance:
Instance
]
where
PresentationSource:
Integer (1..4)
Select the video input source to be used for presentation, identified by source number.
SendingMode:
LocalRemote/LocalOnly
Select whether the presentation is shown locally or locally and remotely. The default
value is LocalRemote.
ConnectorId:
Integer (1..5)
Select the video input source to be used for presentation, identified by connectorId.
Instance:
New/1/2/3/4/5/6
Select which local presentation instance you wish to start.
xCommand Presentation Stop
Stop the media stream from the presentation source.
Requires user role: ADMIN, USER
USAGE:
xCommand Presentation Stop [Instance:
Instance
] [PresentationSource:
PresentationSource
]
where
Instance:
1/2/3/4/5/6
Select which local presentation you wish to stop, identified by presentation instance.
PresentationSource:
Integer (1..4)
Select which local presentation you wish to stop, identified by source number.
Provisioning commands
xCommand Provisioning CompleteUpgrade
Starts installing the software upgrade if you wish to install it before it is set to do so.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning CompleteUpgrade
xCommand Provisioning PostponeUpgrade
Postpones the installing of the software upgrade.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning PostponeUpgrade SecondsToPostpone:
SecondsToPostpone
where
SecondsToPostpone:
Integer (0..65534)
Set how long to postpone the upgrade. The value is in seconds.
xCommand Provisioning StartUpgrade
The codec software can be upgraded from the provisioning server. When starting the upgrade
the software is automatically downloaded and installed. The codec reboots to complete the
software upgrade.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning StartUpgrade
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand
