Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring Firewall Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
102
5
•
Log
—If checked, this ACL rule is logged when a packet match happens.
•
Log Prefix
—This string is attached in front of the log for the matched event.
•
Source Interface
—Select
LAN
,
WAN
, or
ANY
interface.
•
Source
—The source IP address to be matched against. You can define a
Single
IP address, a
Range
of IP addresses (start IP and end IP), a
Network
(IP Prefix and Network Mask), or
ANY
IP addresses.
•
Destination
—The destination IP address to be matched against. You can
define a
Single
IP address, a
Range
of IP addresses (start IP and end IP), a
Network
(IP Prefix and Network Mask), or
ANY
IP addresses.
•
Service Management
Button—Click this button and the Service Tab to add
new service type to the Service drop-down menu.
•
Scheduling
-
Time
—Enter the time period in which this rule is applied (used together
with Date). It can be set to Any Time.
-
Date
—Enter the days in a week on which this rule is applied (used
together with Time). It can be set to Any Day.
STEP 3
Click
Save
.
Configuring Internet Access Policy
The Firewall > Internet Access Policy window displays the policies that are used
by the router to control access to the Internet. A policy consists of four
components:
•
The MAC- or IP- addresses of the personal computers to which to apply this
policy
•
Whether to
Deny
or
Allow
Internet service for this policy
•
The time and date on which to enable this policy, and
•
The URLs or Keywords to apply this policy.