Description
Error/Warning Message
Error/Warning
ID
You cannot switch the timing source
manually when a higher priority
switch is already active.
A higher priority switch is already active.
EID-3140
Refer to the error message text.
An attempt was made to access a bad reference.
EID-3141
None of the switches are active.
No switch is active.
EID-3142
CTC encountered an error while a
creating static route entry.
An error occurred while creating the static route entry.
EID-3143
The number of static routes has
exceeded its limit.
The maximum number of static routes has been
exceeded.
EID-3144
The Routing Information Protocol
(RIP) metric should be in the range of
1 to 15.
The RIP metric must be between 1 and 15.
EID-3145
Refer to the error message text.
The RIP metric is invalid.
EID-3146
There was an error while creating the
summary address.
An error occurred while creating the summary address.
EID-3147
You must provision any one of the
layer 2 domain.
No Layer 2 domain has been provisioned.
EID-3148
Refer to the error message text.
The MAC addresses could not be retrieved.
EID-3149
The specified target file is not a
normal file.
The target file {0} is not a normal file.
EID-3150
The target file is not writeable. Specify
another file.
The target file {0} is not writable.
EID-3151
CTC encountered an error creating
Protection Group.
An error occurred while creating the protection group.
EID-3152
Refer to the error message text.
The card cannot be deleted because it is in use.
EID-3153
CTC cannot perform the task on the
card.
An error occurred while provisioning the card: CTC
cannot {0} the card.
EID-3154
CTC encountered an error building the
menu.
An error occurred while building the menu.
EID-3155
CTC encountered an error while
building the menu, as cards could not
be found for the specified group).
An error occurred while building the menu. Cards were
not found for the {0} group.
EID-3156
CTC encountered an unexpected
model class while trying to complete
the task.
The selected model could not be set because of an
unexpected model class: {0}.
EID-3157
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
504
Error Messages
Error Messages Reference
