Description
Error/Warning Message
Error/Warning
ID
Refer to the error message text.
The sum of the {0} must be between {1} and {2}.
EID-3189
The number of High Orders
(STS/STM) for the line is not
available.
The number of high order circuits for the line could not
be retrieved.
EID-3214
Used frequently in pane classes to
indicate a general error condition when
trying to refresh from the model.
An error occurred while refreshing.
EID-3215
Refer to the error message text.
The proxy port is invalid.
EID-3216
CTC could not refresh statistics
values.
The statistics could not be refreshed.
EID-3217
Refer to the error message text.
The automatic node setup could not be launched.
EID-3218
Failure trying to retrieve automatic
node setup information.
The automatic node setup information could not be
refreshed.
EID-3219
Error refreshing the specified row.
An error occurred while refreshing row {0}.
EID-3220
Refer to the error message text.
The statistics could not be cleared.
EID-3222
Used frequently in pane classes to
indicate a general error condition when
trying to refresh from the model.
An error occurred while refreshing the pane.
EID-3225
Refer to the error message text.
The {0} termination(s) could not be deleted. {1}
EID-3226
CTC failed to set the baseline values
while provisioning NE. Previous
values remain unchanged.
A baseline could not be recorded. Performance metrics
will remain unchanged.
EID-3227
Refer to the error message text.
The {0} termination(s) could not be created. {1}
EID-3228
Turn off the Routing Information
Protocol (RIP) on the LAN, before
enabling OSPF.
RIP is active on the LAN. Please disable RIP before
enabling OSPF.
EID-3229
Turn off the OSPF on the LAN before
enabling RIP.
OSPF is active on the LAN. Please disable OSPF before
enabling RIP.
EID-3230
An error was encountered while
attempting to provision the optical
power received (OPR).
An error occurred while setting the OPR.
EID-3231
Edit the port state while provisioning
the port.
The port state cannot be indirectly transitioned because
the port is still providing services. If the port state
should be changed, edit it directly through port
provisioning.
WID-3232
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
507
Error Messages
Error Messages Reference
