Description
Error/Warning Message
Error/Warning
ID
There was an error retrieving the
thresholds.
An error occurred while retrieving thresholds.
EID-3025
You cannot modify the Send
DoNotUse field.
The send DoNotUse attribute cannot be modified.
EID-3026
You cannot modify the SyncMsg field.
The SyncMsg attribute cannot be modified.
EID-3027
You cannot change the port type.
The port type cannot be changed.
EID-3028
Refer to the error message text.
Unable to switch to the byte because an overhead
change is present on this byte of the port.
EID-3029
There was an error while resetting card
hardware.
An error occurred while hard-resetting the card.
EID-3031
There was an error while resetting the
card.
An error occurred while resetting the card.
EID-3032
Refer to the error message text.
The lamp test is not supported on this shelf.
EID-3033
Refer to the error message text.
The cross-connect diagnostics cannot be performed
EID-3035
The cross-connect diagnostics test is
not supported on this shelf.
The cross-connect diagnostics test is not supported on
this shelf.
EID-3036
There was an error while changing the
card.
An error occurred while changing the card type.
EID-3039
The selected card type is invalid.
The card type is invalid.
EID-3040
CTC is unable to create a protection
group. Check if the protect port
supports circuits, a timing reference,
SONET SDCC, orderwire, or a test
access point.
An error occurred while applying changes.
EID-3041
Refer to the error message text.
The flow control low value must be less than the flow
control high value for all ports in the card.
EID-3042
The flow control watermark value
must be between the two specified
values.
The flow control watermark value must be between {0}
and {1}, inclusive.
EID-3046
Refer to the error message text.
The file {0} could not be read. Please verify the name
and try again.
EID-3047
CTC could not find the configuration
file for IOS startup.
There is no Cisco IOS startup configuration file
available to download.
EID-3048
Refer to the error message text.
The download cannot be done at this time because an
update in progress.
EID-3049
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
498
Error Messages
Error Messages Reference
