Description
Error/Warning Message
Error/Warning
ID
You must create provisionable
patchcords between transponder trunk
ports and mux/demux ports that are on
different nodes.
Provisionable patchcords cannot be created between
transponder trunk ports and multiplexer/demultiplexer
ports on the same node.
EID-5037
Wavelengths used by provisionable
patchcords for transponder trunk ports
and mux/demux ports must be the
same.
Provisionable patchcords created between transponder
trunk ports and multiplexer/demultiplexer ports must
use the same wavelength: {0} is not equal to {1}.
EID-5038
Transmitter and receiver port
wavelengths are not equal. Provision
the receiver and transmitter
wavelengths on transmitter and
receiver ports respectively.
Provisionable patchcords created between transponder
trunk ports and multiplexer/demultiplexer ports must
use the same wavelength: {0} is not equal to {1}. Please
provision the {2} wavelength on {3}.
EID-5039
Refer to the error message text.
Provisionable patchcords created between OC3/OC12
ports and multiplexer/demultiplexer ports are not
supported.
EID-5040
Refer to the error message text.
Provisionable patchcords created between gray OC-N
trunk ports and multiplexer/demultiplexer ports are not
supported.
EID-5041
Wavelengths used by provisionable
patchcords for OC-N trunk ports and
mux/demux ports must be the same.
Provisionable patchcords created between OC-N trunk
ports and multiplexer/demultiplexer ports must use the
same wavelength: {0} is not equal to {1}.
EID-5042
Refer to the warning message text.
Warning: Only the line card was provisioned. The
wavelength compatibility check was skipped.
WID-5043
Refer to the error message text.
Virtual links can be used only for OCH-Trail circuits.
EID-5044
Set wavelengths for the virtual link
and proceed.
The virtual link does not have wavelengths available.
EID-5045
Refer to the warning message text.
Warning: if you select "Use OCHNC Direction," your
circuit will be limited to nodes prior to release 07.00.
WID-5046
Refer to the error message text.
Provisionable patchcords created between OC3/OC12
ports are not supported.
EID-5047
Refer to the error message text.
Provisionable patchcords created between gray OC-N
trunk ports are not supported.
EID-5048
Refer to the error message text.
Provisionable patchcords created between gray OC-N
trunk ports and multiplexer/demultiplexer ports are not
supported.
EID-5049
The specified Element Model cannot
be located.
The element model could not be found. {0}
EID-5050
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
523
Error Messages
Error Messages Reference
