35-102
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Chapter 35 Configuring IP Unicast Routing
Configuring Protocol-Independent Features
To delete an entry, use the
no route-map
map tag
global configuration command or the
no
match
or
no
set
route-map configuration commands.
You can distribute routes from one routing domain into another and control route distribution.
Beginning in privileged EXEC mode, follow these steps to control route redistribution. Note that the
keywords are the same as defined in the previous procedure.
To disable redistribution, use the
no
form of the commands.
The metrics of one routing protocol do not necessarily translate into the metrics of another. In these
situations, an artificial metric is assigned to the redistributed route. Uncontrolled exchanging of routing
information between different routing protocols can create routing loops and seriously degrade network
operation.
If you have not defined a default redistribution metric that replaces metric conversion, some automatic
metric translations occur between routing protocols:
•
RIP can automatically redistribute static routes. It assigns static routes a metric of 1 (directly
connected).
•
Any protocol can redistribute other routing protocols if a default mode is in effect.
Step 21
set weight
Set the BGP weight for the routing table. The value can
be from 1 to 65535.
Step 22
end
Return to privileged EXEC mode.
Step 23
show route-map
Display all route maps configured or only the one
specified to verify configuration.
Step 24
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
router
{
bgp
|
rip
|
ospf
|
eigrp
}
Enter router configuration mode.
Step 3
redistribute
protocol
[
process-id
] {
level-1
|
level-1-2
|
level-2
} [
metric
metric-value
] [
metric-type
type-value
]
[
match internal
|
external
t
ype-value
] [
tag
tag-value
]
[
route-map
map-tag
] [
weight
weight
] [
subnets
]
Redistribute routes from one routing protocol to
another routing protocol. If no route-maps are
specified, all routes are redistributed. If the keyword
route-map
is specified with no
map-tag
, no routes are
distributed.
Step 4
default-metric
number
Cause the current routing protocol to use the same
metric value for all redistributed routes (BGP, RIP and
OSPF).
Step 5
default-metric
bandwidth delay reliability loading mtu
Cause the EIGRP routing protocol to use the same
metric value for all non-EIGRP redistributed routes.
Step 6
end
Return to privileged EXEC mode.
Step 7
show route-map
Display all route maps configured or only the one
specified to verify configuration.
Step 8
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Summary of Contents for ME 3400 Series
Page 40: ...Contents xl Cisco ME 3400 Ethernet Access Switch Software Configuration Guide OL 9639 07 ...
Page 44: ...xliv Cisco ME 3400 Ethernet Access Switch Software Configuration Guide OL 9639 07 Preface ...
Page 1138: ...Index IN 52 Cisco ME 3400 Ethernet Access Switch Software Configuration Guide OL 9639 07 ...
