manualshive.com logo in svg

Cisco ME 3400 Series, Software Configuration Manual

The Cisco ME 3400 Series is a cutting-edge networking device designed to empower businesses with seamless connectivity. Enhance your networking skills effortlessly with the comprehensive Software Configuration Manual, available for free download from our website. Maximize productivity with this user-friendly manual, exclusively for Cisco ME 3400 Series users.

Share
Download
background image

 

B-32

Cisco ME 3400 Ethernet Access Switch Software Configuration Guide

OL-9639-07

Appendix B      Working with the Cisco IOS File System, Configuration Files, and Software Images

Working with Software Images

The 

archive upload-sw

 command builds an image file on the server by uploading these files in order: 

info, the Cisco IOS image, and the web management files. After these files are uploaded, the upload 
algorithm creates the tar file format. 

Caution

For the download and upload algorithms to operate properly, do 

not

 rename image names.

Copying Image Files By Using RCP

You can download a switch image from an RCP server or upload the image from the switch to an RCP 
server.

You download a switch image file from a server to upgrade the switch software. You can overwrite the 
current image with the new one or keep the current image after a download.

You upload a switch image file to a server for backup purposes. You can use this uploaded image for 
future downloads to the same switch or another of the same type.

Note

Instead of using the 

copy

 privileged EXEC command or the 

archive tar

 privileged EXEC command, we 

recommend using the 

archive download-sw

 and 

archive upload-sw 

privileged EXEC commands to 

download and upload software image files. 

These sections contain this configuration information:

  •

Preparing to Download or Upload an Image File By Using RCP, page B-32

  •

Downloading an Image File By Using RCP, page B-33

  •

Uploading an Image File By Using RCP, page B-35

Preparing to Download or Upload an Image File By Using RCP

RCP provides another method of downloading and uploading image files between remote hosts and the 
switch. Unlike TFTP, which uses User Datagram Protocol (UDP), a connectionless protocol, RCP uses 
TCP, which is connection-oriented. 

To use RCP to copy files, the server from or to which you will be copying files must support RCP. The 
RCP copy commands rely on the rsh server (or daemon) on the remote system. To copy files by using 
RCP, you do not need to create a server for file distribution as you do with TFTP. You only need to have 
access to a server that supports the remote shell (rsh). (Most UNIX systems support rsh.) Because you 
are copying a file from one place to another, you must have read permission on the source file and write 
permission on the destination file. If the destination file does not exist, RCP creates it for you.

RCP requires a client to send a remote username on each RCP request to a server. When you copy an 
image from the switch to a server by using RCP, the Cisco IOS software sends the first valid username 
in this list:

  •

The username specified in the 

archive download-sw

 or 

archive upload-sw 

privileged EXEC 

command if a username is specified.

  •

The username set by the 

ip rcmd remote-username

 

username

 global configuration command if the 

command is entered.

Summary of Contents for ME 3400 Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ME 3400 Series

Cabletron Systems SmartSwitch Router User'S Reference Manual preview
SmartSwitch Router
Brand: Cabletron Systems Pages: 338
IBM AS/400 Hardware User Manual preview
AS/400
Brand: IBM Pages: 104
IBM System Storage TS3100 Setup, Operator, And Service Manual preview
System Storage TS3100
Brand: IBM Pages: 375
Magnadyne RV2458 User Manual preview
RV2458
Brand: Magnadyne Pages: 13
N-Tron 7018 User Manual & Installation Manual preview
7018
Brand: N-Tron Pages: 138
Lanner NCA-2510 Installation Manual preview
NCA-2510
Brand: Lanner Pages: 2
D-Link DIR-853/EE Quick Installation Manual preview
DIR-853/EE
Brand: D-Link Pages: 83
Juniper MX2010 Hardware Manual preview
MX2010
Brand: Juniper Pages: 825
National Instruments FieldPoint FP-3000 User Manual preview
FieldPoint FP-3000
Brand: National Instruments Pages: 118
Keysight Technologies U3024AH10 User'S And Service Manual preview
U3024AH10
Brand: Keysight Technologies Pages: 106
Proxim TeraBridge 5845 Specifications preview
TeraBridge 5845
Brand: Proxim Pages: 4
Linksys USB100H1 User Manual preview
USB100H1
Brand: Linksys Pages: 44
H3C SR8800-F Installation Manual preview
SR8800-F
Brand: H3C Pages: 148
NETGEAR WGR614DLNA Datasheet preview
WGR614DLNA
Brand: NETGEAR Pages: 2
I-Tech NW117HD-8Ke User Manual preview
NW117HD-8Ke
Brand: I-Tech Pages: 6
OWC MINISTACK STX User Manual preview
MINISTACK STX
Brand: OWC Pages: 8
Zte MF971V Quick Start Manual preview
MF971V
Brand: Zte Pages: 32
Asus WL-167g deluxe User Manual preview
WL-167g deluxe
Brand: Asus Pages: 44

Brands by name

Popular brands

Load more brands