Cisco ME 3400 Series, Software Configuration Manual

Page: 1084 / 1138

C-10
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Appendix C Unsupported Commands in Cisco IOS Release 12.2(50)SE
MSDP
Unsupported Global Configuration Commands
exception crashinfo
errdisable detect cause dhcp-rate-limit
errdisable recovery cause dhcp-rate-limit
errdisable recovery cause unicast flood
l2protocol-tunnel global drop-threshold
memory reserve critical
power inline consumption default wattage
service compress-config
stack-mac persistent timer
track object-number rtr
Unsupported show platform Commands
show platform ip unicast vrf { compaction | tcam-label }
show platform ipv6 unicast
show platform tb
MSDP
Unsupported Privileged EXEC Commands
show access-expression
show exception
show location
show pm LINE
show smf [ interface-id ]
show subscriber-policy [ policy-number ]
show template [ template-name ]
Unsupported Global Configuration Commands
ip msdp default-peer ip-address | name [ prefix-list list ] (Because BGP/MBGP is not supported, use the
ip msdp peer command instead of this command.)