manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

89 - 238

 

CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 7 

Copyright 

©

 2004, Cisco Systems, Inc.  

The 

debug ip igrp events

 command can be used to verify that the timers affect routing 

updates. Have the students configure IGRP on the lab topology.  

7.3.5 Configuring IGRP 

To enable IGRP routing use the 

router igrp as-number

 global configuration command. 

To disable IGRP routing use the 

no router igrp as-number

 command.  

RouterA(config)#

router igrp as-number

 

RouterA(config-router)# 
RouterA(config)#

no router igrp as-number

  

RouterA(config)#

 

To identify which networks will participate in the IGRP routing process, use the 

network 

network-address 

router configuration command. To remove a network from the IGRP 

routing process, use the 

no network network-address 

command. 

RouterA(config)#

router igrp 101

 

RouterA(config-router)#

network 192.168.1.0

 

RouterA(config)#

router igrp 101

 

RouterA(config-router)#

no network 192.168.1.0

 

The autonomous system number is used to identify the router to other IGRP routers and to tag 
routing information. Have the students configure IGRP on the lab topology

.  

7.3.6 Migrating from RIP to IGRP 

With the creation of the IGRP in the early 80s, Cisco Systems was the first company to solve 
the problems associated with RIP. IGRP was designed to have a greater maximum hop count, 
which gave it more scalability for larger companies. IGRP uses multiple metrics to determine 
the best path, bandwidth, and delay, as opposed to the hop count metric used by RIP. As a 
result of these improvements, IGRP enabled many large, complex, and topologically diverse 
internetworks to be deployed. Have the students configure the lab topology with RIP and then 
migrate to IGRP. Make sure that students understand that RIP is still the most implemented 
routing protocol in smaller internetworks. Also, emphasize that IGRP can only be used in a 
fully Cisco environment.

 

 

7.3.7 Verifying IGRP Configuration 

The following commands and available switches can be used to verify the configuration of 
IGRP: 

• 

show interface 

• 

show ip protocol 

• 

show ip route 

• 

show running-config 

The 

show interface

 command can be used to verify issues that are specifically related to 

the interface configuration such as the ip address, physical connectivity, and keepalives. The 

show ip protocol

 command should be used to verify that routing protocols are correctly 

configured. This command can be used to view the routing protocols enabled on the router, 

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

3Com 486 Getting Started Manual preview
486
Brand: 3Com Pages: 20
Linksys WRT54G3G-AT Product Data preview
WRT54G3G-AT
Brand: Linksys Pages: 2
Cambium Networks PTP 550 Series Quick Start Manual preview
PTP 550 Series
Brand: Cambium Networks Pages: 68
Cambium Networks PTP 820S Installation Manual preview
PTP 820S
Brand: Cambium Networks Pages: 110
Patton electronics 1090 Service Manual preview
1090
Brand: Patton electronics Pages: 8
IBM AS/400 Hardware User Manual preview
AS/400
Brand: IBM Pages: 104
IBM System Storage TS3100 Setup, Operator, And Service Manual preview
System Storage TS3100
Brand: IBM Pages: 375
Vivotek FE9181-H Quick Installation Manual preview
FE9181-H
Brand: Vivotek Pages: 170
ADTRAN 617600026F1 Quick Start Manual preview
617600026F1
Brand: ADTRAN Pages: 9
ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
NETGEAR RAXE500 User Manual preview
RAXE500
Brand: NETGEAR Pages: 169
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
WAGO 750-459 Manual preview
750-459
Brand: WAGO Pages: 48
Xyclop XC-4CH-NVR-1TB User Manual preview
XC-4CH-NVR-1TB
Brand: Xyclop Pages: 144
Silvertel Ag102 User Manual preview
Ag102
Brand: Silvertel Pages: 9
Paradyne JetFusion 2100 Series User Manual preview
JetFusion 2100 Series
Brand: Paradyne Pages: 296
Comtrend Corporation WAP-5922MP Quick Install Manual preview
WAP-5922MP
Brand: Comtrend Corporation Pages: 4
Linksys PLK300 Quick Installation Manual preview
PLK300
Brand: Linksys Pages: 6

Brands by name

Popular brands

Load more brands