manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

102 - 238  CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 9 

Copyright 

©

 2004, Cisco Systems, Inc.  

9.1 Examining the Routing Table 

Essential Labs:

 

9.1.1, 9.1.2, and 9.1.8 

Optional Labs:

 None 

Core TIs:

  

All 

Optional TIs:   

none 

Course-Level Claim:

 Students can configure, verify, analyze, and troubleshoot simple 

distance vector routing protocols. 

Certification-Level Claim:

 Students can troubleshoot and configure routing protocols based 

on user requirements. 

Hands-on skills:

  none 

9.1.1 The show ip route command 

One of the primary functions of a router is to determine the best path to a given destination. A 
router learns paths from the configuration or from other routers through routing protocols. They 
use RAM to store this routing information in routing tables. A routing table contains the best 
available routes to destinations. The 

show ip route

 command displays the contents of the 

IP routing table. The routing table contains entries for all known networks and subnetworks 
and a code that indicates how that information was learned. Discuss how valuable the 

show 

ip route

 command is to network troubleshooting.

 

Routes can be added to a router through two methods: 

• 

Static routing

 – An administrator manually defines routes. These routes do not 

change until a network administrator manually programs the changes. 

• 

Dynamic routing

 – Routers follows rules defined by a routing protocol to 

exchange routing information. These routes change automatically as neighboring 
routers update each other with new information. 

Discuss with the students the differences between static routing and dynamic routing. This is 
an important concept for the students to understand. The instructor should also emphasize 
that the router would not know what to do with a packet if there was no route to forward it 
toward the destination

.

  

9.1.2 Determining the gateway of last resort 

Routers do not maintain routes to every possible destination. Instead, routers can keep a 
default route, or a gateway of last resort. The router will use this default route to forward a 
packet to a different router. Default routes can be statically entered by an administrator or 
dynamically learned through a routing protocol. Before routers can dynamically exchange 
information, an administrator must configure at least one router with a default route.  

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

TDC Netopia User Manual preview
Netopia
Brand: TDC Pages: 27
Radwin Transportation FiberinMotion Deployment Manual preview
Transportation FiberinMotion
Brand: Radwin Pages: 122
Tandberg Data RDX QuikStation 4 Quick Start Manuals preview
RDX QuikStation 4
Brand: Tandberg Data Pages: 2
XAVI Technologies Corp. 7721r User Manual preview
7721r
Brand: XAVI Technologies Corp. Pages: 71
Ruckus Wireless ZoneFlex 7731 Getting Started Manual preview
ZoneFlex 7731
Brand: Ruckus Wireless Pages: 56
BHU NETWORKS BXM2 User Manual preview
BXM2
Brand: BHU NETWORKS Pages: 75
Comway 4G DTU Configuration Instructions preview
4G DTU
Brand: Comway Pages: 20
National Instruments NI 447 Series User Manual preview
NI 447 Series
Brand: National Instruments Pages: 80
Buffalo LinkStation 500 User Manual preview
LinkStation 500
Brand: Buffalo Pages: 139
Allied Telesis CentreCOM AT-3716XL Quick Install Manual preview
CentreCOM AT-3716XL
Brand: Allied Telesis Pages: 2
Genexis FiberTwist XGS2420 Installation Manual preview
FiberTwist XGS2420
Brand: Genexis Pages: 7
Billion BEC MX-1000 User Manual preview
BEC MX-1000
Brand: Billion Pages: 158
Infoblox ND-2200 Installation Manual preview
ND-2200
Brand: Infoblox Pages: 44
N-Tron 104TX Specification Sheet preview
104TX
Brand: N-Tron Pages: 2
ZyXEL Communications ONU5100-B22 User Manual preview
ONU5100-B22
Brand: ZyXEL Communications Pages: 2
ZyXEL Communications GS1900 Series User Manual preview
GS1900 Series
Brand: ZyXEL Communications Pages: 263
N-Tron 304TX-N Specifications preview
304TX-N
Brand: N-Tron Pages: 2
Balluff BNI EIP-508 05-Z015 Series User Manual preview
BNI EIP-508 05-Z015 Series
Brand: Balluff Pages: 74

Brands by name

Popular brands

Load more brands