manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

33 - 238

 

CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 3 

Copyright 

©

 2004, Cisco Systems, Inc.  

3.2 Finishing the Configuration 

Essential Labs:

 

3.2.3, 3.2.5, 3.2.7, and 3.2.9 

Optional Labs:

 None 

Core TIs:

  

All 

Optional TIs:   

none 

Course-Level Claim:

 Students can configure additional administrative functionality on a router 

Certification-Level Claim:

 Students can configure a router for additional administrative 

functionality. 

Hands-on skills:

  none 

3.2.1 Importance of configuration standards 

This section introduces the importance of configuration standards. The following topics are 
covered: 

• 

Configuration of interface descriptions 

• 

Message-of-the day banners 

• 

Configuration of host tables 

• 

Backup configuration documentation 

In many organizations, standards are either treated very seriously or there are no standards. It 
is important to develop standards for configuration files within an organization. These can be 
used to control of the number of configuration files that must be maintained, how the files are 
stored, and where the files are stored. 

In organizations where standards are treated seriously, students need to understand that it is 
very important for the standards to be followed. In organizations where there are no standards, 
students can introduce standards to add value to the organization. 

Students need to understand why standards are important and begin to apply them in the lab. 
Encourage students to create and use standards. Remember to simulate real-world 
environments in the classroom and lab.  

A centralized support standard is necessary to manage a network. Configuration, security, 
performance, and other issues must be adequately addressed for the network to function 
properly. The creation of standards for network consistency helps reduce network complexity, 
the amount of unplanned downtime, and exposure to network impacting events. Emphasize 
that there should be a standard for everything and that each standard should be a written part 
of the documentation and procedures. These should include how configuration files are 
named, how interfaces are addressed, and the description used on interfaces.  

The use of these standards is very important for troubleshooting. Explain to students that the 
same network associate will not always troubleshoot the network device. If the previous 

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

D-Link xStack Storage DSN-4000 Series Datasheet preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 5
Quick Eagle Networks 5842 Specification Sheet preview
5842
Brand: Quick Eagle Networks Pages: 4
Datasheen D902AC User Manual preview
D902AC
Brand: Datasheen Pages: 25
Freund FE-W826-T2 Setup Manual preview
FE-W826-T2
Brand: Freund Pages: 6
Nilox 16NX071900001 User Manual preview
16NX071900001
Brand: Nilox Pages: 66
Planet GSW-2416SF User Manual preview
GSW-2416SF
Brand: Planet Pages: 54
Calix GS2020E GigaSPIRE BLAST Quick Start Manual preview
GS2020E GigaSPIRE BLAST
Brand: Calix Pages: 15
Rackable Systems OmniStor 4900F Series User Manual preview
OmniStor 4900F Series
Brand: Rackable Systems Pages: 196
HMS Anybus AWB3000 Startup Manual preview
Anybus AWB3000
Brand: HMS Pages: 18
Alcatel 7270 MSC Specifications preview
7270 MSC
Brand: Alcatel Pages: 4
rtd IDAN-ID5915 User Manual preview
IDAN-ID5915
Brand: rtd Pages: 28
MAKER MADE MASLOW CNC Setting Up preview
MASLOW CNC
Brand: MAKER MADE Pages: 40
Paradyne Hotwire 7996 User Manual preview
Hotwire 7996
Brand: Paradyne Pages: 46
Proxim 68568r1 Installation And Management Manual preview
68568r1
Brand: Proxim Pages: 65
Allied Telesis FS750/16 Installation Manual preview
FS750/16
Brand: Allied Telesis Pages: 44
Ezviz Vault Plus Quick Start Manual preview
Vault Plus
Brand: Ezviz Pages: 38
Fujitsu PCNA EP OCe14102 Installation Manual preview
PCNA EP OCe14102
Brand: Fujitsu Pages: 20
Fujitsu PR-LN4 Software Manual preview
PR-LN4
Brand: Fujitsu Pages: 34

Brands by name

Popular brands

Load more brands