manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

13 - 238

 

CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 1 

Copyright 

©

 2004, Cisco Systems, Inc.  

1.1.4 Role of Routers in a WAN 

There are several encapsulations associated with serial lines: 

• 

HDLC 

• 

Frame Relay 

• 

PPP 

• 

SDLC 

• 

SLIP 

• 

LAPB 

Some of the most common WAN technologies are as follows: 

• 

POTS 

• 

ISDN 

• 

X.25 

• 

Frame Relay 

• 

ATM 

• 

T1, T3, E1, and E3 

• 

DSL 

• 

SONET 

Ask students to briefly explain each of the WAN technologies and discuss the differences 
between technologies and encapsulations. They will be covered in detail in CCNA 4. 

It is important to encourage student interest and enthusiasm in this TI. The world of WAN 
technologies is briefly introduced. Many students will be familiar with one or more of the 
technologies used. Many of these topics will be covered in CCNA 4 and students should be 
encouraged to do additional research on one of these technologies and present it to the class.  

1.1.5 Academy approach to hands-on labs 

In the Networking Academy lab, all the networks are connected with a serial or Ethernet cable. 
This allows the students to see and touch all of the equipment. In a real network, the routers 
would not be in one physical location. In the Networking Academy lab, the serial cables are 
connected back-to-back. However, in the real world the cables would be connected through a 
CSU or DCE device.  

Discuss the differences between real networking environments and the router lab setup. Help 
the students visualize the components between the V.35 connectors. If they can understand 
this picture, then they will realize that they are working with a complete WAN minus the carrier 
services. 

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

DBM ACE9600 Operating Manual preview
ACE9600
Brand: DBM Pages: 50
FOR-A MFR-16DTIO Installation Manual preview
MFR-16DTIO
Brand: FOR-A Pages: 2
Allied Telesis AT-9424Ts/XP AC Datasheet preview
AT-9424Ts/XP AC
Brand: Allied Telesis Pages: 3
KEMP Technologies LoadMaster 1500 Installation And Configuration Manual preview
LoadMaster 1500
Brand: KEMP Technologies Pages: 71
TP-Link VIGI NVR1008 Quick Installation Manual preview
VIGI NVR1008
Brand: TP-Link Pages: 2
Garland EdgeLens INT10G8LR56 User Manual preview
EdgeLens INT10G8LR56
Brand: Garland Pages: 30
H3C NSQ1GT48EA0 Manual preview
NSQ1GT48EA0
Brand: H3C Pages: 3
Ubiquiti PBE-5AC-300-ISO Quick Start Manual preview
PBE-5AC-300-ISO
Brand: Ubiquiti Pages: 28
Orolia Seven Solutions WR-ZEN Series User Manual preview
Seven Solutions WR-ZEN Series
Brand: Orolia Pages: 167
Grundig GSS STC 160 Assembly Instruction Manual preview
GSS STC 160
Brand: Grundig Pages: 24
TVT Digital TD-3316B4-16P-A1 Quick Start Manual preview
TD-3316B4-16P-A1
Brand: TVT Digital Pages: 2
Caen A 1735 Technical Information Manual preview
A 1735
Brand: Caen Pages: 14
B-G Instruments DataPlot CB1224 Manual preview
DataPlot CB1224
Brand: B-G Instruments Pages: 4
GarrettCom Industrial Network Track OSI Brochure preview
Industrial Network Track OSI
Brand: GarrettCom Pages: 10
ADIC FCR 200 Operator'S Manual preview
FCR 200
Brand: ADIC Pages: 140
AMX NXF Dimensional Drawing preview
NXF
Brand: AMX Pages: 1
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
Zhone ETHX-2214-DS3 Installation Instructions Manual preview
ETHX-2214-DS3
Brand: Zhone Pages: 28

Brands by name

Popular brands

Load more brands