manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

15 - 238

 

CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 1 

Copyright 

©

 2004, Cisco Systems, Inc.  

Ask students the following questions: 

• 

What are the different types of RAM used by a router? 

• 

Can the RAM be upgraded in a router? 

1.2.3 Router external connections 

The three basic types of connections on a router are LAN interfaces, WAN interfaces, and 
management ports. LAN interfaces allow the router segment network boundaries within a LAN 
and reduce broadcast traffic within a LAN. WAN connections are provided through a service 
provider which connects two or more distant site through the Internet or PSTN. The LAN and 
WAN connections provide network connections through which frames are passed. The 
management port provides an ASCII or text-based connection for the configuration and 
troubleshooting of the router.  

Ask students the following questions: 

• 

What are the three basic types of connections on a router? 

• 

What is the console connection used for? 

1.2.4 Management port connections 

The management ports are asynchronous serial ports. They are the console port and the 
auxiliary port. Not all routers have an auxiliary port. These serial ports are not designed as 
networking ports. To prepare for initial startup and configuration, attach an RS-232 ASCII 
terminal or a computer that emulates an ACSII terminal to the system console port. 

It is essential for students to understand the difference between network interfaces and non-
network interfaces. The instructor may need to talk about the differences extensively.  

Discuss the following topics: 

• 

The network ports use network encapsulation frames while the non-network ports 
are bit and byte oriented. 

• 

There is no addressing involved in the serial management ports.  

• 

The serial interface for management is asynchronous and the serial WAN interface 
is synchronous. 

Ask students the following questions: 

• 

Which port is preferred for troubleshooting and why? 

• 

Do all routers have an auxiliary port? 

1.2.5 Console Port Connections 

The console port is a management port used to provide out-of-band access to a router. It is 
used for the initial configuration of the router, monitoring, and disaster recovery procedures. 

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

IBM 51 Troubleshooting Manual preview
51
Brand: IBM Pages: 248
Lanner NCA-2510 Installation Manual preview
NCA-2510
Brand: Lanner Pages: 2
Paradyne Adapter Bracket Notice preview
Adapter Bracket
Brand: Paradyne Pages: 1
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Brand: Fortinet Pages: 20
Allied Telesis AT-9424Ts/XP AC Datasheet preview
AT-9424Ts/XP AC
Brand: Allied Telesis Pages: 3
KEMP Technologies LoadMaster 1500 Installation And Configuration Manual preview
LoadMaster 1500
Brand: KEMP Technologies Pages: 71
Garderos R-7700 Series Operating Manual preview
R-7700 Series
Brand: Garderos Pages: 23
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Brand: Ubiquiti Pages: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Brand: CG Pages: 112
Hunter Pro-C Series Programming Instructions preview
Pro-C Series
Brand: Hunter Pages: 2
Maipu SM3100-9TC-AC Install Manual preview
SM3100-9TC-AC
Brand: Maipu Pages: 26
Matrix Switch Corporation MSC-2HD1624S Product Manual preview
MSC-2HD1624S
Brand: Matrix Switch Corporation Pages: 54
Extron electronics Network Adapter AC AAP Specifications preview
Network Adapter AC AAP
Brand: Extron electronics Pages: 2
Matrix Switch Corporation MSC-CP16X4E Product Manual preview
MSC-CP16X4E
Brand: Matrix Switch Corporation Pages: 48
Lanpro LP-F22 Series Assembling Instructions preview
LP-F22 Series
Brand: Lanpro Pages: 3
ADTRAN NetVanta 300 Series Quick Start Manual preview
NetVanta 300 Series
Brand: ADTRAN Pages: 2
Planet FGSW-4840S User Manual preview
FGSW-4840S
Brand: Planet Pages: 38
C-Data FD612H User Manual preview
FD612H
Brand: C-Data Pages: 19

Brands by name

Popular brands

Load more brands