manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

16 - 238

 

CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 1 

Copyright 

©

 2004, Cisco Systems, Inc.  

Students may not be familiar with the term out-of-band. Out-of-band refers to the fact that the 
management control communications use a different path or channel than the data 
communications.  

Ask students the following questions:  

• 

What type of terminal emulation must the PC or terminal support? 

• 

What are the steps to connect the PC to a router? 

1.2.6 Connecting Router LAN interfaces 

In most LAN environments, an Ethernet or FastEthernet interface is used to connect the router 
to the LAN. The router is a host that connects to the LAN through a hub or a switch. A straight-
through cable is used to make this connection. The correct interface must be used.  

If the wrong interface is connected, the router or other networking devices may be damaged. 
This is generally not true within LAN interfaces. However, if LAN interfaces are connected to 
some form of WAN interface such as ISDN, damage can occur. The students should be taught 
to be observant and careful whenever connections are made.  

Ask students the following questions: 

• 

What type of cable is used to connect from the router Ethernet interface to a hub 
or switch? 

• 

What type of cable is used to connect from the router Ethernet interface to a router 
Ethernet interface? 

1.2.7 Connecting WAN interfaces 

There are many forms of WAN connections. A WAN uses many different types of technology 
to make data connections across a broad geographic area. WAN services are usually leased 
from service providers. The WAN connection types include leased line, circuit switched, and 
packet switched. 

Many of the WAN interfaces use the same physical interfaces but different pinouts and 
electrical characteristics. This difference in electrical characteristics could potentially cause 
damage if the wrong connections were made. Again, the students should be taught to be 
observant and careful when they make any connections.  

Ask students to perform the following tasks: 

• 

List the physical layer standards that Cisco routers support. 

• 

List the different types of WAN connections. 

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

Dahua Smart 1U Quick Start Manual preview
Smart 1U
Brand: Dahua Pages: 24
Avid Technology MediaStream ConnectPlus 1000 Installation And Operation Manual preview
MediaStream ConnectPlus 1000
Brand: Avid Technology Pages: 74
NETGEAR RP334 Installation Manual preview
RP334
Brand: NETGEAR Pages: 2
Garderos R-7700 Series Operating Manual preview
R-7700 Series
Brand: Garderos Pages: 23
impinj Speedway Revolution Installation And Operation Manual preview
Speedway Revolution
Brand: impinj Pages: 60
Sans Digital ELITENAS EN104L+(B) Quick Installation Manual preview
ELITENAS EN104L+(B)
Brand: Sans Digital Pages: 9
B-G Instruments DataPlot CB1224 Manual preview
DataPlot CB1224
Brand: B-G Instruments Pages: 4
ANTAIRA LMP-1202M-SFP Series Quick Installation Manual preview
LMP-1202M-SFP Series
Brand: ANTAIRA Pages: 2
DPS Telecom D-PK-NG432 User Manual preview
D-PK-NG432
Brand: DPS Telecom Pages: 80
Netequalizer NE3000-10 Quick Start Manual preview
NE3000-10
Brand: Netequalizer Pages: 14
Eaton 9479-ETG-CSL Instruction Manual preview
9479-ETG-CSL
Brand: Eaton Pages: 32
LevelOne ServCon FPS-3003 Quick Install Manual preview
ServCon FPS-3003
Brand: LevelOne Pages: 45
National Instruments USB device 622x User Manual preview
USB device 622x
Brand: National Instruments Pages: 23
ICP DAS USA PDS-734 Quick Start Manual preview
PDS-734
Brand: ICP DAS USA Pages: 8
Laguna Tools Smartshop M User Manual preview
Smartshop M
Brand: Laguna Tools Pages: 24
MikroTik Wireless Wire Quick Manual preview
Wireless Wire
Brand: MikroTik Pages: 25
Crestron HZA-PWR-15A Quick Start preview
HZA-PWR-15A
Brand: Crestron Pages: 2
D-Link mydlink DCH-S220 User Manual preview
mydlink DCH-S220
Brand: D-Link Pages: 35

Brands by name

Popular brands

Load more brands