manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

71 - 238

 

CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 6 

Copyright 

©

 2004, Cisco Systems, Inc.  

network topology information. This is measured in hop counts, or the number of routers in the 
path to a destination network. 

Distance vector algorithms do not allow a router to know the exact topology of an internetwork. 
The router only uses hop count to determine the best path. Distance vector algorithms require 
each router to send its entire routing table to each of its neighbors. This creates network traffic 
and there is a limit to the number of hops a distance vector routing protocol will use. The RIP 
maximum hop count is 15 and IGRP is 255. Explain that distance vector routing protocols use 
the view of neighboring routers to develop their view of the internetwork. The router will use 
copies of neighboring routing tables to build its routing table.

  

6.2.6 Link-state routing protocol features 

The second basic algorithm used for routing is the link-state algorithm. Link-state algorithms 
are also known as Dijkstras algorithms. 

Link-state routing uses the following:  

• 

A topological database 

• 

The SPF algorithm and the resulting SPF tree  

• 

A routing table of paths and ports to each network  

• 

A link-state advertisement (LSA), which is a small packet sent between routers 
that contains link information  

Link-state routing requires more memory. Routers send updates when there is a change in the 
table. There is less network traffic because the routers are not sending updates every 30 or 90 
seconds. The routers in an area elect a Designated Router (DR) and a Backup Designated 
Router (BDR). When a change is made in the network, the router that notices the change 
sends an update to the DR. When an update occurs, only the change is sent instead of the 
entire routing table. The DR then sends the network change to all routers in the area with a 
multicast. 

An important concept to mention is that routers that use a link-state routing protocol develop a 
common view of the internetwork. A link-state protocol collects links from neighboring routers 
to create a routing table. Students also need to understand that the updates from the routers 
contain information about the links. These links can be locally connected or received from 
other routers. Students also need to know that the updates are partial updates. 

6.3 Routing Protocols Overview 

Essential Labs:

 None 

Optional Labs:

 None 

Core TIs:

  

All 

Optional TIs:   

none 

Course-Level Claim:

 Students can evaluate the characteristics of routing protocols. 

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

D-Linke DHP-346AV Quick Installation Manual preview
DHP-346AV
Brand: D-Linke Pages: 32
Parker H Series Installation & Service Instructions Manual preview
H Series
Brand: Parker Pages: 344
Usr USR4504 Installation Manual preview
USR4504
Brand: Usr Pages: 2
IBM totalstorage 200 Hardware Installation Manual preview
totalstorage 200
Brand: IBM Pages: 152
Lancom GS-2310P Instruction Manual preview
GS-2310P
Brand: Lancom Pages: 25
Abocom WR5502 User Manual preview
WR5502
Brand: Abocom Pages: 63
Paradyne Hotwire 8343 Installation Instructions Manual preview
Hotwire 8343
Brand: Paradyne Pages: 6
Cleerline SSF Quick Start Manual preview
SSF
Brand: Cleerline Pages: 2
Netequalizer NE3000-10 Quick Start Manual preview
NE3000-10
Brand: Netequalizer Pages: 14
Garderos R-3700 Series Operating Manual preview
R-3700 Series
Brand: Garderos Pages: 21
Wieland wienet UMS 5-L Installation Instruction preview
wienet UMS 5-L
Brand: Wieland Pages: 2
Hama 53178 Instruction Manual preview
53178
Brand: Hama Pages: 45
HighPoint NA381TB Quick Installation Manual preview
NA381TB
Brand: HighPoint Pages: 3
Baicells Aurora243 Installation Manual preview
Aurora243
Brand: Baicells Pages: 38
Zmotion ECI3808 Manual preview
ECI3808
Brand: Zmotion Pages: 57
ZKTeco BioSense Series User Manual preview
BioSense Series
Brand: ZKTeco Pages: 96
Aethra AF3400 Technical Specifications preview
AF3400
Brand: Aethra Pages: 2
LevelOne FEU-2410 Technical Specifications preview
FEU-2410
Brand: LevelOne Pages: 2

Brands by name

Popular brands

Load more brands