manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

22 - 238

 

CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 2 

Copyright 

©

 2004, Cisco Systems, Inc.  

If a router does not boot up correctly, issue the 

show version

 command to examine the 

configuration register to see if it is booting. 

Remind the students that the router is a special purpose computer. It has a boot sequence that 
is similar to a standard computer. The router must load the IOS from one of several sources. 
The router must also obtain a configuration file. If a configuration file is not available, the router 
will enter setup mode, which prompts the user for a basic router configuration. Make sure the 
students understand what the router needs as basic configuration information. This provides a 
lot of information about how the router works. It is very important for students to understand 
the difference between the IOS and the configuration file. 

2.2.4 Establish a console session 

To establish a HyperTerminal Console session, students should complete the following steps:  

1.  Connect the terminal with an RJ-45-to-RJ-45 rollover cable and an RJ-45-to-DB-9 or 

RJ-45-to-DB-25 adapter  

2.  Configure the terminal or PC terminal emulation software for 9600 baud, 8 data bits, no 

parity, 1 stop bit, and no flow control  

Instruct the students to connect the cables from the router to the PC and to connect with the 
HyperTerminal program. To configure a router, a connection must be established between the 
PC and a router. Make sure students understand that this is how routers need to be configured 
initially, but it is not the only way to configure a router. 

2.2.5 Router login 

There are two levels of access to commands in a router: 

• 

User EXEC mode 

• 

Privileged EXEC mode 

The user EXEC mode is a view-only mode. Enter privileged EXEC mode with the 

enable

 

command from the User prompt. Other modes can be accessed from privileged mode to 
configure a router. The students should have a lot of practice with hands-on activities in the lab 
setup. It is important for students to understand the various modes to be able to accurately 
configure a router. It is not necessary to memorize all commands. Students must understand 
each mode so they can make the configurations from the correct locations.  

2.2.6 Keyboard help in the router CLI 

At the user mode prompt, a question mark (

?

) should be typed to display a list of commands 

available in the router. From user mode, the 

enable

 command will switch the router into the 

privileged mode. If a question mark (

?

) is entered from the privileged mode prompt, many 

more commands are listed as available commands to use in the router. Students should briefly 
review the types of commands in each mode. There is no need to memorize all of the 
commands. 

The context-sensitive help is one of the most useful features of the IOS. Teach the student 
that the question mark (?) is extremely helpful in the router.  

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

Patton electronics 3210 Specification Sheet preview
3210
Brand: Patton electronics Pages: 2
Lantronix SISPM1040-582-LRT Quick Start Manual preview
SISPM1040-582-LRT
Brand: Lantronix Pages: 2
Lantronix SDS1101 Quick Start Manual preview
SDS1101
Brand: Lantronix Pages: 7
Lantronix Maestro E220 Series Quick Start Manual preview
Maestro E220 Series
Brand: Lantronix Pages: 25
REXROTH efc series Instruction Manual preview
efc series
Brand: REXROTH Pages: 68
Quectel Wi-Fi-M.2 EVB User Manual preview
Wi-Fi-M.2 EVB
Brand: Quectel Pages: 23
Compaq StorageWorks AIT 35GB AutoLoader Overview And Installation preview
StorageWorks AIT 35GB AutoLoader
Brand: Compaq Pages: 4
EMCIS LISN User'S Operating Manual preview
LISN
Brand: EMCIS Pages: 14
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Brand: National Instruments Pages: 130
XtendLan XL-HCW224C User Manual preview
XL-HCW224C
Brand: XtendLan Pages: 52
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Brand: Ubiquiti Pages: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Brand: CG Pages: 112
LUX LUMEN 10230 Manual preview
10230
Brand: LUX LUMEN Pages: 41
H3C SecPath F1070 Manual preview
SecPath F1070
Brand: H3C Pages: 68
LevelOne WBR-3402TX User Manual preview
WBR-3402TX
Brand: LevelOne Pages: 146
Black Box LB9002A-SC-R3 Manual preview
LB9002A-SC-R3
Brand: Black Box Pages: 12
Sharedband Power Router 2 Configuration Manual preview
Power Router 2
Brand: Sharedband Pages: 3
Helmholz REX 100 3G Quick Start Manual preview
REX 100 3G
Brand: Helmholz Pages: 20

Brands by name

Popular brands

Load more brands