manualshive.com logo in svg

Cisco CCNA 2, Instructor Manual

Get your hands on the Cisco CCNA 2 Instructor Manual, a comprehensive and essential resource for networking professionals. This manual can be downloaded for free from our website, offering detailed instructions and guidance to enhance your understanding of Cisco CCNA 2.

Share
Download
background image

35 - 238

 

CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 3 

Copyright 

©

 2004, Cisco Systems, Inc.  

Ask students the following questions: 

• 

Which configuration mode is used to enter the description? 

• 

What are the commands to add a description to an interface? 

3.2.4 Login banners 

Students must realize that a login banner can be seen by anyone. 

This login banner should be a warning that users should not attempt to log in unless they are 
authorized. A message such as “This is a secure system, authorized access only!” instructs 
unwanted intruders to beware. A login banner is a message that is displayed at login and can 
be used to convey messages that affect all network users such as system shutdowns. Make 
sure students understand that these banners should be warnings and not invitations.  

Ask students the following questions: 

• 

Who can see a login banner? 

• 

What is an example of a good login banner? 

• 

Where is the login banner displayed? 

3.2.5 Configuring message-of-the-day (MOTD) 

A message-of-the-day (MOTD) banner can be displayed on all connected terminals. Students 
must enter global configuration mode to configure a message-of-the-day banner. They should 
use the 

banner motd

 command, followed by a space and a delimiting character such as the 

pound sign (#). Next, students should add a message of the day followed by a space and the 
delimiting character again. Instruct students to follow these steps to display a message-of-the-
day: 

1.  Enter global configuration mode with the 

configure terminal

 

command.  

2. Enter 

the 

banner motd # message of the day #

 command. 

3.  Save changes with the 

copy running-config startup-config

 or 

copy run 

start

 command. 

3.2.6 Host name resolutions 

Protocols such as Telnet use host names to identify network devices or hosts. Network 
devices such as routers must be able to associate host names with IP addresses to 
communicate with other IP devices. 

Each unique IP address can have a host name associated with it. The Cisco IOS software 
maintains a cache of host name-to-address mappings for use by EXEC commands. A

 

host 

name resolution is the process a computer system uses to associate a name with a network 
address.  

 

Summary of Contents for CCNA 2
















































































































































































































































Reviews:

No comments

Related manuals for CCNA 2

Vaisala TERMBOX-1200 User Manual preview
TERMBOX-1200
Brand: Vaisala Pages: 32
Xircom RealPort Ethernet 10/100 User Manual preview
RealPort Ethernet 10/100
Brand: Xircom Pages: 30
Tektronix CTS 850 User Manual preview
CTS 850
Brand: Tektronix Pages: 178
B&B Electronics RS-232/422/485 Serial Card CE 3PXCC4A User Manual preview
RS-232/422/485 Serial Card CE 3PXCC4A
Brand: B&B Electronics Pages: 47
Accton Technology MR3202A User Manual preview
MR3202A
Brand: Accton Technology Pages: 78
Compro Technology RS-2104 Quick Installation Manual preview
RS-2104
Brand: Compro Technology Pages: 2
Korenix JetNet 3705 User Manual preview
JetNet 3705
Brand: Korenix Pages: 25
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
Dahua NVRPRO User Manual preview
NVRPRO
Brand: Dahua Pages: 113
Razer RZ37-0251 Manual preview
RZ37-0251
Brand: Razer Pages: 17
Topcom Xplorer 871B (Norwegian) Hurtig Installasjonsveiledning preview
Xplorer 871B
Brand: Topcom Pages: 16
Tripp Lite N201-001-BL Specification Sheet preview
N201-001-BL
Brand: Tripp Lite Pages: 3
Amer.com 8-Port 10/100Mbps Fast Ethernet Switch User Manual preview
8-Port 10/100Mbps Fast Ethernet Switch
Brand: Amer.com Pages: 14
Atlantis Land 32 bit 10/100 Fast Ethernet Card A02-S32-S Quick Installation Manual preview
32 bit 10/100 Fast Ethernet Card A02-S32-S
Brand: Atlantis Land Pages: 9
ZyXEL Communications Prestige 642R Series User Manual preview
Prestige 642R Series
Brand: ZyXEL Communications Pages: 163
Radio Shack TRS-80 PTC-64 Operation Manual preview
TRS-80 PTC-64
Brand: Radio Shack Pages: 40
QCT QuantaGrid D51PH-1ULH Service Manual preview
QuantaGrid D51PH-1ULH
Brand: QCT Pages: 167
ZyXEL Communications P-660R-F1 series User Manual preview
P-660R-F1 series
Brand: ZyXEL Communications Pages: 268

Brands by name

Popular brands

Load more brands