Cisco Catalyst 3560-X Series, Software Configuration Manual

Page: 706 / 1538

1-8
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Configuring IGMP Snooping and MVR
Configuring IGMP Snooping
Enabling or Disabling IGMP Snooping
By default, IGMP snooping is globally enabled on the switch. When globally enabled or disabled, it is
also enabled or disabled in all existing VLAN interfaces. IGMP snooping is by default enabled on all
VLANs, but can be enabled and disabled on a per-VLAN basis.
Global IGMP snooping overrides the VLAN IGMP snooping. If global snooping is disabled, you cannot
enable VLAN snooping. If global snooping is enabled, you can enable or disable VLAN snooping.
Beginning in privileged EXEC mode, follow these steps to globally enable IGMP snooping on the
switch:
To globally disable IGMP snooping on all VLAN interfaces, use the no ip igmp snooping global
configuration command.
Beginning in privileged EXEC mode, follow these steps to enable IGMP snooping on a VLAN interface:
To disable IGMP snooping on a VLAN interface, use the no ip igmp snooping vlan vlan-id global
configuration command for the specified VLAN number.
Setting the Snooping Method
Multicast-capable router ports are added to the forwarding table for every Layer 2 multicast entry. The
switch learns of such ports through one of these methods:
•
Snooping on IGMP queries, Protocol-Independent Multicast (PIM) packets, and Distance Vector
Multicast Routing Protocol (DVMRP) packets
• Listening to Cisco Group Management Protocol (CGMP) packets from other routers
•
Statically connecting to a multicast router port with the ip igmp snooping mrouter global
configuration command
Command Purpose
Step 1 configure terminal Enter global configuration mode.
Step 2
ip igmp snooping Globally enable IGMP snooping in all existing VLAN interfaces.
Step 3 end Return to privileged EXEC mode.
Step 4 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2 ip igmp snooping vlan vlan-id Enable IGMP snooping on the VLAN interface.The VLAN ID range
is 1 to 1001 and 1006 to 4094.
Note
IGMP snooping must be globally enabled before you can
enable VLAN snooping.
Step 3
end Return to privileged EXEC mode.
Step 4 copy running-config startup-config (Optional) Save your entries in the configuration file.