Cisco Catalyst 3560-X Series, Software Configuration Manual

Page: 1243 / 1538

1-11
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Configuring Enhanced Object Tracking
Configuring Enhanced Object Tracking Features
Beginning in privileged EXEC mode, follow these steps to configure a primary interface for DHCP:
Configuring a Cisco IP SLAs Monitoring Agent and Track Object
Beginning in privileged EXEC mode, follow these steps to configure network monitoring with Cisco IP
SLAs:
Command Purpose
Step 1 configure terminal Enter global configuration mode.
Step 2 interface interface-id Select a primary or secondary interface and enter interface
configuration mode.
Step 3 description string Add a description to the interface.
Step 4
ip dhcp client route track number Configure the DCHP client to associate any added routes with the
specified track number. Valid numbers are from 1 to 500.
Step 5 ip address dhcp Acquire an IP address on an Ethernet interface from DHCP.
Step 6 exit Return to global configuration mode.
Step 1 configure terminal Enter global configuration mode.
Step 2 ip sla operation-number Begin configuring a Cisco IP SLAs operation and enter IP SLA
configuration mode.
Step 3
icmp-echo { destination-ip-address |
destination hostname [ source- ipaddr
{ ip-address | hostname source-interface
interface-id ]
Configure a Cisco IP SLAs end-to-end ICMP echo response time
operation and enter IP SLAs ICMP echo configuration mode.
Step 4 timeout milliseconds Set the amount of time for which the operation waits for a response
from its request packet.
Step 5 frequency seconds Set the rate at which the operation is sent into the network.
Step 6 threshold milliseconds Set the rising threshold (hysteresis) that generates a reaction event
and stores history information for the operation.
Step 7
exit Exit IP SLAs ICMP echo configuration mode.
Step 8 ip sla schedule operation-number [ life
{ forever | seconds }] start-time time |
pending | now | after time ] [ ageout
seconds ] [ recurring ]
Configure the scheduling parameters for a single IP SLAs operation.
Step 9{ track object-number rtr operation-number
{ state | reachability }
Track the state of a Cisco IOS IP SLAs operation and enter tracking
configuration mode.
Step 10 end Return to privileged EXEC mode.
Step 11
show track object-number Display tracking information to verify the configuration.
Step 12 copy running-config startup-config (Optional) Save your entries in the configuration file.