Chapter 4 Troubleshooting and Routine Procedures
Updating the Driver
4-20
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Step 5
In the Windows NT Setup window, enter the full path to the new driver (for
example, you would enter A:\ if you copied the file to the root of a floppy disk)
and click Continue.
Step 6
Follow the instructions on the screen to complete the upgrade process.
Upgrading the Driver for Windows 2000
Step 1
Make sure your client adapter is installed in your computer.
Step 2
Double-click My Computer, Control Panel, System, the Hardware tab, Device
Manager, and Network Adapters.
Step 3
Select the Cisco Systems wireless LAN adapter.
Step 4
Select the Driver tab.
Step 5
Click the Update Driver button.
Step 6
The Update Device Driver Wizard window appears. Click Next.
Step 7
Select Search for a suitable driver for my device (Recommended) and click
Next.
Step 8
Select the location of the new driver (floppy disk drive or specify a location),
deselect the other options, and click Next.
Step 9
Enter the full path to the new driver (if you selected to specify a location) and
click OK.
Step 10
A message appears indicating that the system is ready to install the new driver.
Click Next and Finish.
The driver upgrade is complete, and the old driver is overwritten by the new one.
Summary of Contents for Aironet 340 Series
Page 4: ......
Page 10: ...Contents x Cisco Aironet Wireless LAN Adapters Hardware Installation Guide OL 0795 01 ...
Page 126: ...Glossary 6 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide OL 0795 01 ...
Page 132: ...Index 6 Cisco Aironet Wireless LAN Adapters Hardware Installation Guide OL 0795 01 ...