Cisco Aironet 340 Series, Hardware Installation Manual

Page: 47 / 132

3-9
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Chapter 3 Installing the Client Adapter
Installing the Correct Driver
Step 16
Select SSID. Type your RF network’s (case-sensitive) SSID in the Value dialog
box. Click OK.
Step 17 If you are prompted to restart your computer, click Yes.
Step 18
If you are not connected to a DHCP server, double-click My Computer,
Control Panel, and Network. Select TCP/IP -> Cisco Systems Wireless LAN
Adapter. Click the Properties button, select Specify an IP address, and enter
the IP address, subnet mask, and default gateway address of your computer
(which can be obtained from your system administrator). Click OK twice. When
prompted to restart your computer, click Yes.
The driver installation is complete.
Windows 95 Version B
If your computer’s operating system is Windows 95 Version B, follow these steps.
Step 1
Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer’s
CD-ROM drive.
Step 2 Copy the Win95Driver.exe file from the Win95 directory on the CD to a floppy
disk or to a directory (other than the root directory) on your computer’s hard
drive.
Step 3 Remove the CD from your computer’s CD-ROM drive.
Step 4 Locate the Win95Driver.exe file on your floppy disk or in a directory on your hard
drive and double-click it to extract the driver files. Unless you specify a different
location, the files are be placed on the floppy disk.
Note
Do not extract the files to the root directory of your hard
drive. Windows 95 is unable to read them from this location.
Step 5
Follow the instructions in the “Inserting the Client Adapter into a Computing
Device” section on page 3-2 to insert the client adapter.
Step 6
After you insert the client adapter into your computing device, Windows
automatically detects it and briefly opens the New Hardware Found window.