Cisco Aironet 340 Series, Hardware Installation Manual

Page: 61 / 132

3-23
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Chapter 3 Installing the Client Adapter
Installing the Correct Driver
Step 11
The Cisco Wireless LAN Adapter Settings dialog box appears.
•
If you are connected to a DHCP server, select Obtain an IP address via
DHCP or Use server-assigned IP address and click OK.
•
If you are not connected to a DHCP server, select Specify an IP address or
Use specific IP address and follow the steps below:
a.
Enter the IP address, subnet mask, and default gateway address of your
computer (which can be obtained from your system administrator).
b. Select the Name Servers tab and enter the primary and secondary DNS
and WINS for your computer (which can be obtained from your system
administrator).
c.
Click OK.
Step 12
Select Start > Programs > Cisco > Aironet Client Utility to open the Aironet
Client Utility (ACU).
Step 13 Select Client Name under Property. Type your Windows CE device’s unique
client name in the Value dialog box.
Step 14
Select SSID under Property. Type your RF network’s case-sensitive SSID in the
Value dialog box.
Step 15 Select Data Rates under Property. Make sure Auto is selected in the list of
options in the Value dialog box.
Step 16
Click OK.
Step 17
The driver and client utility installation is complete. Refer to the Cisco Aironet
Wireless LAN Adapters Software Configuration Guide for instructions on how to
use each utility.