Cisco Aironet 340 Series, Hardware Installation Manual

Page: 84 / 132

Chapter 4 Troubleshooting and Routine Procedures
Removing the Driver
4-12
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Step 10
Select the Cisco Systems wireless LAN adapter.
Step 11
Click Remove.
Step 12
When asked if you wish to continue, click Yes and Close.
Step 13
When prompted to restart your computer, click No.
Step 14
Remove the CD from your computer’s CD-ROM drive.
Step 15
Shut down your computer.
Step 16
Remove the client adapter.
Step 17
Go to the “Inserting the Client Adapter into a Computing Device” section on
page 3-2 for instructions on inserting your new client adapter and installing the
latest driver.
Removing the 6.10 Driver for Windows 2000
Step 1
Make sure the previous client adapter is in your computer and the computer is
booted up.
Step 2 Right-click the WepStat icon in the system tray on your desktop. This icon looks
like two connected computers.
Step 3
Click Terminate.
Step 4
Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer’s
CD-ROM drive.
Step 5 Open Windows Explorer.
Step 6 Click Tools, Folder Options, and View.
Step 7 Under Hidden files and folders, make sure Show hidden files and folders is
selected, make sure the Hide file extensions for known file types checkbox is
deselected, and click OK.
Step 8 Find the \Utilities\RmWep directory on your computer’s CD-ROM drive.
Step 9 Double-click the RmWep.exe file.
Step 10 Go to C:\Windows\Inf and double-click the oemx.inf and oemx.pnf files, where x
equals a numeral, to open them.
Step 11
Delete the oemx.inf and oemx.pnf files that are labeled Aironet.