Cisco Aironet 340 Series, Hardware Installation Manual

Page: 59 / 132

3-21
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Chapter 3 Installing the Client Adapter
Installing the Correct Driver
Step 13
Select Start > Programs > Cisco > Aironet Client Utility to open the Aironet
Client Utility (ACU).
Step 14 Select Client Name under Property. Type your Windows CE device’s unique
client name in the Value dialog box.
Step 15
Select SSID under Property. Type your RF network’s case-sensitive SSID in the
Value dialog box.
Step 16 Select Data Rates under Property. Make sure Auto is selected in the list of
options in the Value dialog box.
Step 17
Click OK.
Step 18
If prompted, eject the client adapter and reinsert it for the changed settings to take
effect.
Step 19
The driver and client utility installation is complete. Refer to the Cisco Aironet
Wireless LAN Adapters Software Configuration Guide for instructions on how to
use each utility.
Windows CE 3.00
If your computer is running Windows CE 3.00, follow these steps.
Step 1
Use a serial or USB cable to connect your Windows CE device to a laptop or PC
running Active Sync. A message appears on the Windows CE device indicating
that it is connecting to the host.
After the Windows CE device is connected, the New Partnership window appears
on the laptop or PC. This window asks if you want to set up a partnership.
Step 2
Choose one of the following options:
•
If you want to establish a partnership that allows you to synchronize files
between the laptop or PC and the Windows CE device, select Yes, click Next,
and follow the instructions on the screen to specify the files to be
synchronized and to finish setting up the partnership.
• If you do not want to synchronize files and want to connect as a “guest,”
select No and click Next. The screen indicates that you are connected as a
guest.