Cisco Aironet 340 Series, Hardware Installation Manual

Page: 60 / 132

Chapter 3 Installing the Client Adapter
Installing the Correct Driver
3-22
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Step 3
Insert the Cisco Aironet Series Wireless LAN Adapters CD into the laptop or PC’s
CD-ROM drive.
Step 4 Use Windows Explorer to browse the CD and locate the *.cab file in the directory
structure that corresponds to the device and processor type of your Windows CE
device.
Example: If you are running Windows CE 3.00 on a pocket PC device with a
StrongARM processor, the appropriate *.cab file would be located in
the following directory structure: WinCE\Ce3.00\SA11xx and would
look something like SA11xxPPC30v131.cab, where SA11xx
indicates the processor type, PPC30 represents Windows CE version
3.00 on a pocket PC device, and v131 indicates the driver version.
Step 5 Drag and drop the appropriate *.cab file from the CD to the root directory (called
My Pocket PC or My Handheld PC) on the Windows CE device.
Step 6
The File Conversion window appears indicating that some files may need to be
converted. Click OK.
Step 7
After the *.cab file is copied to the Windows CE device, remove the CD from the
laptop or PC and disconnect the Windows CE device.
Step 8 On your Windows CE device, open File Explorer or Windows Explorer and
locate the *.cab file in the root directory.
Step 9
Click the *.cab file to execute it. The cisco.dll driver is installed in the \Windows
directory, the client utilities are extracted to the Windows\Start Menu\
Programs\Cisco directory, and the *.cab file is removed.
Step 10 Follow the instructions in the “Inserting the Client Adapter into a Computing
Device” section on page 3-2 to insert the client adapter into the PC card slot of
the Windows CE device.
The Windows CE device should configure the client adapter, and the green LED
on the adapter should blink. If this does not happen, remove the client adapter,
reset the Windows CE device, and reinsert the client adapter.