Cisco Aironet 340 Series, Hardware Installation Manual

Page: 66 / 132

Chapter 3 Installing the Client Adapter
Installing the Correct Driver
3-28
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Step 6
Click the Install button in the bottom right corner of the window.
Step 7
When a window appears informing you that the installation requires a restart of
your computer, click the Continue button.
Step 8
After the files are copied to the designated folder in Macintosh HD, a window
appears indicating that the installation was successful. Click the Restart button.
Step 9
After your computer reboots, follow the instructions in the “Inserting the Client
Adapter into a Computing Device” section on page 3-2 to insert the client adapter
into your PowerBook’s PC card slot. The Cisco Wireless LAN Adapter icon
appears on the desktop.
Step 10
Click the apple-shaped icon in the top left corner of the desktop.
Step 11
Select Control Panels > AppleTalk. The AppleTalk window appears.
Step 12
Make sure the name of the correct wireless LAN adapter appears in the Connect
via dialog box. If it does not, click the up or down arrow on the right side of the
Connect via dialog box and select the correct adapter.
Step 13 Close the AppleTalk window.
Step 14
Click the apple-shaped icon in the top left corner of the desktop.
Step 15
Select Control Panels > TCP/IP. The TCP/IP window appears.
Step 16 Select Cisco Wireless LAN Adapter in the Connect via drop-down box.
Step 17 Perform one of the following:
• If you are connected to a DHCP server, select Using DHCP Server in the
Configure drop-down box and type your computer’s unique client name in the
DHCP Client ID field.
•
If you are not connected to a DHCP server, select Manually in the Configure
drop-down box and enter the IP address, subnet mask, router address, name
server address, and search domains of your computer (which can be obtained
from your system administrator). Only the IP address and subnet mask are
required.
Step 18 Close the TCP/IP window.
Step 19 When a window appears asking if you want to save changes to the current
configuration, click the Save button.