Cisco Aironet 340 Series, Hardware Installation Manual

Page: 75 / 132

4-3
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Chapter 4 Troubleshooting and Routine Procedures
Problems after Installing the Driver
Problems after Installing the Driver
Note If you experience problems during driver installation, you may want
to restart the installation process. Go to the “Removing the Driver”
section on page 4-9 to start with a clean install.
Follow the instructions in this section if you experience difficulty with your client
adapter after installing the driver (for instance, your computer repeatedly freezes
at the network login screen, the green LED does not blink to indicate that the
adapter is active, etc.).
Client Adapter Recognition Problems
If your client adapter is not being recognized by your computer’s PCMCIA
adapter, check your computer’s BIOS and make sure that the PC card controller
mode is set to PCIC compatible.
Note A computer’s BIOS varies depending on the manufacturer. For
support on BIOS-related issues, consult your computer’s
manufacturer.
Off Blinking quickly Client adapter is in power save
mode.
On Blinking quickly Client adapter is in ad hoc mode.
Off On Driver installed incorrectly.
Off Blinking in a pattern Indicates an error condition.
Table 4-1 LED Operating Messages (continued)
Green LED Amber LED Condition