Cisco Aironet 340 Series, Hardware Installation Manual

Page: 81 / 132

4-9
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Chapter 4 Troubleshooting and Routine Procedures
Removing the Driver
Removing the Driver
This section provides instructions for removing a client adapter driver from your
computer. Two examples of when you may need to remove a driver are listed
below:
• If you are running Windows 95, 98, NT, or 2000 and a Cisco Aironet client
adapter was previously installed on your computer with the 6.10 driver, you
must remove this driver before you can install a more recent driver, such as
the one provided on the Cisco Aironet Series Wireless LAN Adapters CD.
•
If you experience difficulty while installing the driver for your computer’s
operating system, you may want to abort the installation procedure and start
over. However, before you attempt to install the driver again, you must first
remove any part of the driver that you may have already installed.
Table 4-2 enables you to quickly locate the instructions for removing a driver for
your specific operating system.
Table 4-2 Locating Driver Removal Instructions
Operating System 6.10 Driver Driver Other Than 6.10
Windows 95 page 4-10 page 4-13
Windows 98 page 4-10 page 4-13
Windows NT page 4-11 page 4-14
Windows 2000 page 4-12 page 4-15
Windows Millennium (Me) Not applicable page 4-13
Windows CE 2.11 Not applicable page 4-16
Windows CE 3.0 Not applicable page 4-16
Linux Not applicable page 4-17
MacOS 9.x Not applicable page 4-17