Cisco Aironet 340 Series, Hardware Installation Manual

Page: 57 / 132

3-19
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Chapter 3 Installing the Client Adapter
Installing the Correct Driver
Windows CE 2.11
If your computer is running Windows CE 2.11, follow these steps.
Step 1
Use a serial or USB cable to connect your Windows CE device to a laptop or PC
running Active Sync. A message appears on the Windows CE device indicating
that it is connecting to the host.
After the Windows CE device is connected, the New Partnership window appears
on the laptop or PC. This window asks if you want to set up a partnership.
Step 2
Perform one of the following:
• If you want to establish a partnership that allows you to synchronize files
between the laptop or PC and the Windows CE device, select Yes, click Next,
and follow the instructions on the screen to specify the files to be
synchronized and to finish setting up the partnership.
• If you do not want to synchronize files and want to connect as a “guest,”
select No and click Next. The screen indicates that you are connected as a
guest.
Step 3
Insert the Cisco Aironet Series Wireless LAN Adapters CD into the laptop or PC’s
CD-ROM drive.
Step 4
Use Windows Explorer to browse the CD and locate the aironet.dll file and the
*.htm (help) files in the directory structure that corresponds to the device and
processor type of your Windows CE device.
Example: If you are running Windows CE 2.11 on a MIPS processor, the
appropriate aironet.dll file and the help files would be located in the
following directory structure: WinCE\Ce2.11\Mips.
Step 5
Drag and drop the appropriate aironet.dll file and the help files from the CD to the
\Windows directory on the Windows CE device.
Step 6
On the Windows CE device, create a folder entitled Cisco in the
\Windows\Programs directory. Creating this folder will enable you to access the
client utilities from Start > Programs > Cisco after the utilities are installed.