4-23
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
78-16124-01
Chapter 4 Installing IDS-4235 and IDS-4250
Installing the Accessories
Figure 4-8
Cable-Management Arm
Step 5
Install the status-indicator cable plug into its connector (see
Figure 4-9 on page 4-24
).
Step 6
Open the wire covers on the cable-management arm by lifting the center of the wire over the top of the
embossed round button on the front of the forward part of the arm, and lifting the wire over the top of a
similar round button on the back part of the arm.
The wire cover swings open to enable cables to be routed within the arm.
Step 7
Route the status-indicator end of the cable assembly through the cable-management arm, and install the
indicator in its slot at the back end of the cable-management arm (see
Figure 4-9 on page 4-24
).
78111
