A-12
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A Power Supply Specifications
1000 W AC-Input Power Supply
Table A-8
list the power supply LEDs and their meanings.
Power supply output
capacity
1000 W
Power supply output
•
15 A @ +3.3 VDC
•
5 A @ +5 VDC
•
6 A @ +12 VDC
•
20.3 A @ +42 VDC
Output holdup time
20 ms minimum
kVA rating
1
1.25 kVA
Heat dissipation
4213 BTU/hour (approx.)
Weight
14.8 lb (6.7 kg)
1.
The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard
circuits and transformers to power a switch.
Table A-7
1000 W Power Supply Specifications (continued)
Specification
Description
Table A-8
1000 W Power Supply LEDs
LED
Meaning
INPUT OK
•
Green—Source AC voltage is OK. (Input voltage is 85 VAC or
greater.)
•
Off—Source AC voltage falls below 70 VAC, is not present, or the
power supply is turned off.
FAN OK
•
Green—Power supply fan is operating properly.
•
Off—Power supply fan failure is detected.
OUTPUT FAIL
•
Red—Problem with one or more of the DC-output voltages of the
power supply is detected.
•
Off—DC-output voltage with acceptable margins.
Note
For proper operation of the OUTPUT FAIL LED, systems with
single power supplies must be configured with a minimum of
one fan tray and one supervisor engine. Systems with dual power
supplies must have a minimum configuration of one fan tray, one
supervisor engine, and one additional module. Failure to meet
these minimum configuration requirements can cause a false
power supply output fail signal.
