4
1
Supervision and control
1.1
The program
This air handling unit is managed by its controller. In addition to its control functions, it also monitors and detects any faults with the
air handling unit.
The HMI terminal displays the following data which can be edited at any time:
. values of connected sensors
. unit on/off cycles
. calibration of the sensors
. detection of alarms and log of the last 100
. the password-protected configuration and operating parameters
. device running times and time delays
. management of time programs (4 daily, 4 weekly and 4 yearly programs)
. language selection (French)
The connection with the pLAN network allows the program to use a terminal mounted on the front of the AHU and/or a wall-
mounted terminal installed in the room to be air conditioned.
IMPORTANT:
To avoid any problems, the password must be known only by qualified personnel.
1.2
The HMI terminal
The terminal provided is equipped with a remote LCD display (8 lines x 22 columns) on the outside of the unit, which has 6 keys
(connected with a phone cable, max length 50m). It allows all of the program operations to be carried out. The terminal displays the
unit's operating conditions at any point in time and allows the parameters to be modified; in addition, it can be disconnected from
the main board as its presence is not strictly required.
Summary of Contents for AirCompact Control
Page 1: ...NA 13 12 B 03 2015 AirCompact Control AirCompact Control manual...
Page 61: ...61...
Page 68: ...68...
