Chrysler Crossfire SRT6 Instruction Manual Download Page 79 | Manualshive

Page: 79 / 280

background image

TELESCOPING STEERING COLUMN

Unlock the steering column by pulling out the handle
located directly below the column. The indicator light
located in the instrument cluster will come on. To
lengthen or shorten the steering column, pull out or push
in the steering wheel. Lock the steering column in
position by pushing the handle in until it engages. The
indicator light in the instrument cluster will go out.

WARNING!

Do not adjust the steering wheel while driving. The
telescoping adjustment must be locked while driv-
ing. Adjusting the steering wheel while driving, or
driving without the telescoping adjustment locked
could cause the driver to lose control of the vehicle.

NOTE:

If the indicator light in the instrument cluster

does not go out after starting the engine, the telescoping
column is not locked properly. Do not drive the vehicle
until you have properly locked the steering column.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

79

3

«
...
77
78
79
80
81
...
»

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments

Related manuals for Crossfire SRT6

Brand: JANE Pages: 6

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

Brand: Audi Pages: 12

Brand: IBASE Technology Pages: 100

S2000 Windscreen Camera Mount

Brand: Modifry Products Pages: 2

Brand: Toyota Pages: 52

Brand: Mini Pages: 20

Brand: Right Weigh Pages: 16

2014 Grand Cherokee SRT8

Brand: Jeep Pages: 596

Brand: Skoda Pages: 4

Brand: cam Pages: 6

Brand: Subaru Pages: 32

Brand: GReddy Pages: 12

Brand: Arrista Pages: 2

Brand: BrandMotion Pages: 12

Brand: Nos Pages: 22

viano 639 series

Brand: Mercedes-Benz Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands