manualshive.com logo in svg

Chrysler Crossfire SRT6, Instruction Manual

The Instruction Manual for the Chrysler Crossfire SRT6 is available for download at manualshive.com. This comprehensive manual provides step-by-step guidance on operating and maintaining the Crossfire SRT6, ensuring a smooth and enjoyable driving experience. Get your free manual now and unlock the full potential of this exceptional sports car.

Share
Download
background image

These include all of the items listed above except the
knee bolster, the instrument panel, and the steering
wheel and column.

•

The Occupant Restraint Controller also turns on the
AIRBAG light in the instrument panel for four seconds
when the ignition is first turned on, then turns the
light off. If it detects a malfunction in any part of the
system, it turns on the light either momentarily or
continuously depending on the condition that is
present at the time.

•

The airbag/inflator units are in the center of the
steering wheel and in the instrument panel. The words
SRS/AIRBAG are embossed on the airbag covers.

WARNING!

Ignoring the AIRBAG light in your instrument panel
could mean you won’t have the airbags to protect
you in a collision. If the light does not come on, stays
on after you start the vehicle, or if it comes on as you
drive, have the airbag system checked right away.

WARNING!

Do not put anything on or around the airbag covers
or attempt to manually open them. You may damage
the airbags and you could be injured because the
airbags are not there to protect you. These protective
covers are designed to open only when the airbags
are inflated.

•

When the crash sensor detects an impact requiring the
airbags, it signals the inflator units. A large quantity of
nontoxic nitrogen gas is generated to inflate the air-
bags. The airbag covers separate and fold out of the
way as the airbags inflate to their full size. The airbags
then quickly deflate while helping to restrain the
driver and passenger. The airbag gas is vented
through the airbag material towards the instrument
panel. In this way the airbags do not interfere with
your control of the vehicle.

32

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments

Related manuals for Crossfire SRT6

Roav R5141 Owner'S Manual preview
R5141
Brand: Roav Pages: 10
Whispbar K611W Fitting Instructions Manual preview
K611W
Brand: Whispbar Pages: 77
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
Nav TV W204PGM Operation Instructions preview
W204PGM
Brand: Nav TV Pages: 3
Scosche BTFREQ PRO BTFMPD3SR Manual preview
BTFREQ PRO BTFMPD3SR
Brand: Scosche Pages: 16
Alpitronic Hypercharger HYC 075 Operation Instructions And Installation Manual preview
Hypercharger HYC 075
Brand: Alpitronic Pages: 64
Opel 2013 Corsa Brochure & Specs preview
2013 Corsa
Brand: Opel Pages: 32
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
TrailFX 2123131 Quick User Manual preview
2123131
Brand: TrailFX Pages: 2
Mercedes-Benz Vito Taxi 2011 Operation Manual preview
Vito Taxi 2011
Brand: Mercedes-Benz Pages: 10
Porsche BOXTER - Technical Manual preview
BOXTER -
Brand: Porsche Pages: 146
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8
Ford 2000 F 350 Owner'S Manual preview
2000 F 350
Brand: Ford Pages: 256
Toyota Tacoma 05 Brochure & Specs preview
Tacoma 05
Brand: Toyota Pages: 26
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15
Honda Vezel Owner'S Manual preview
Vezel
Brand: Honda Pages: 279

Brands by name

Popular brands

Load more brands