manualshive.com logo in svg

Chrysler Crossfire SRT6, Instruction Manual

The Instruction Manual for the Chrysler Crossfire SRT6 is available for download at manualshive.com. This comprehensive manual provides step-by-step guidance on operating and maintaining the Crossfire SRT6, ensuring a smooth and enjoyable driving experience. Get your free manual now and unlock the full potential of this exceptional sports car.

Share
Download
background image

into another gear that allows for quicker acceleration or
to slow the vehicle down is possible. Downshifts can also
be performed.

Press and hold the selector lever in the “D-” direction.
The transmission will shift from the current gear directly
to the best gear for acceleration.

NOTE:

To avoid overrevving the engine when the

selector lever is moved in “D-” direction, the transmis-
sion will not shift to a lower gear if the engine’s revolu-
tions per minute limit would be exceeded.

Briefly press the selector lever in the “D+” direction. The
transmission will shift from the current gear to the next
higher gear.

Press and hold the selector lever in the “D+” direction.
The transmission will shift from the current gear directly
to gear “D.”

WARNING!

On slippery road surfaces, never downshift in order
to obtain braking action. This could result in drive
wheel slip and reduced vehicle control. Your vehi-
cle’s ABS will not prevent this type of loss of control.
You could lose control of your vehicle and have an
accident.

NOTE:

With transmission in gear “D,” “4,” or “3,”

upshifting from FIRST to SECOND to THIRD gear may
be delayed, depending on vehicle speed and engine
temperature. This allows the catalytic converter to heat
up more quickly to operating temperatures.

The delayed upshift is effective with vehicle speeds
below 31 mph (50 km/h) at partial throttle and engine
temperatures below 95°F (35°C). To prevent the engine
from laboring at low RPM when driving uphill or with
your vehicle heavily loaded, the automatic transmis-
sion will downshift when necessary to maintain en-
gine RPM within the best torque range.

STARTING AND OPERATING

135

5

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments

Related manuals for Crossfire SRT6

Thule 1306 RAPID SYSTEM Fitting Instructions Manual preview
1306 RAPID SYSTEM
Brand: Thule Pages: 8
Prorack K748 Fitting Instructions Manual preview
K748
Brand: Prorack Pages: 14
Kolpin Outdoors 25-1080 Assembly & Owners Manual preview
25-1080
Brand: Kolpin Outdoors Pages: 6
Schartec CR 4 Manual preview
CR 4
Brand: Schartec Pages: 2
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
Firestone Ride-Rite Air Helper Springs 2173 Installation Instructions preview
Ride-Rite Air Helper Springs 2173
Brand: Firestone Pages: 4
Xblitz Mirror 2016 User Manual preview
Mirror 2016
Brand: Xblitz Pages: 30
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
METRON PC05T User Manual preview
PC05T
Brand: METRON Pages: 4
Unex OBU-352EC Quick Start Manual preview
OBU-352EC
Brand: Unex Pages: 30
Waeco Magic Watch MWE-850-4DSM Installation And Operating Manual preview
Magic Watch MWE-850-4DSM
Brand: Waeco Pages: 204
GReddy 12519101 Instruction Manual preview
12519101
Brand: GReddy Pages: 12
Acura RLX 2016 Service Bulletin preview
RLX 2016
Brand: Acura Pages: 7
Brainz 38508 Instruction Manual preview
38508
Brand: Brainz Pages: 2
Reese 50085 Installation Instructions Manual preview
50085
Brand: Reese Pages: 21
Safe Fleet HD3S Quick Installation Manual preview
HD3S
Brand: Safe Fleet Pages: 2
BMW 1998 318ic Electrical Troubleshooting Manual preview
1998 318ic
Brand: BMW Pages: 386

Brands by name

Popular brands

Load more brands